Advan GT Premium Version Forged Wheel | 20x12.0 | +20 ET | 5x114.3 | 73mm Bore | Machining & Hyper Platinum Black | Single Wheel

The Advan GT Premium Version is Advan's flagship forged wheel — a motorsport-derived 1-piece forged aluminium wheel that represents the pinnacle of Advan's wheel engineering and finishing. The GT Premium Version builds on the legendary Advan GT with enhanced finishing details and the Premium Version's refined spoke design — a wheel that is equally at home on a time attack build, a track day car, or a premium street build where the highest level of wheel quality is required. This listing is for a single wheel in 20x12.0, +20 ET, 5x114.3 bolt pattern, 73mm centre bore, in the Machining & Hyper Platinum Black finish. Advan is Yokohama's performance brand — one of the most respected wheel and tyre brands in Japanese motorsport, with decades of Super GT, Super Formula, and time attack development experience.

Key Features:

• 1-piece forged aluminium construction — forged from a single billet of aluminium — superior strength-to-weight ratio compared to cast wheels — the correct construction for a high-performance wheel application where weight and strength are both critical
• GT Premium Version design — Advan's flagship GT wheel in the Premium Version specification — refined spoke design and enhanced finishing details that set the GT Premium apart from the standard GT
• Machining & Hyper Platinum Black finish — Advan's Machining & Hyper Platinum Black two-tone finish — machined spoke faces contrasted against a deep Hyper Platinum Black spoke body — one of the most visually striking finishes in the Advan GT lineup
• 20x12.0 sizing — a wide, aggressive 12.0" width in 20" diameter — correct for wide-body builds, aggressive fitment setups, and high-performance applications where maximum tyre contact patch is required
• +20 ET offset — a low +20mm offset for a wide, aggressive stance — correct for wide-body or aggressive fitment builds where maximum track width is required
• 5x114.3 bolt pattern — one of the most common bolt patterns in the Japanese performance market — correct for a wide range of Nissan, Toyota, Honda, Mazda, and Subaru performance platforms
• 73mm centre bore — 73mm hub bore — verify hub bore compatibility with your specific vehicle before ordering — hub centric rings are available if your vehicle's hub diameter is smaller than 73mm
• Advan / Yokohama quality — manufactured by Advan (Yokohama), one of the most respected wheel brands in Japanese motorsport

Advan GT Premium Version — The Wheel:

The Advan GT is one of the most iconic Japanese performance wheels ever produced — a wheel with a motorsport heritage that spans decades of Super GT, Super Formula, and time attack competition. The GT Premium Version is the refined, enhanced-finish iteration of the GT — featuring the same forged construction and motorsport-derived spoke geometry as the standard GT, with elevated finishing details that make the GT Premium the correct choice for builds where the highest level of wheel presentation is required alongside the GT's proven performance credentials. The 20x12.0 +20ET specification is an aggressive, wide fitment — correct for wide-body builds and high-performance applications where maximum tyre width and contact patch are priorities.

20x12.0 +20ET — Fitment Context:

The 20x12.0 +20ET is an extremely wide, aggressive wheel specification — a 12.0" wide wheel with a low +20mm offset that pushes the wheel face significantly outward from the hub. This specification is correct for wide-body builds, aggressive fitment setups, and high-performance track applications where maximum tyre width is required. At this specification, significant suspension modification (camber adjustment, spacers, or wide-body fenders) will be required on most vehicles to achieve correct clearance. Verify fitment for your specific vehicle, suspension setup, and body configuration before ordering — this is an aggressive specification that requires careful fitment verification.

Specifications:

• Brand: Advan (Yokohama)
• Part Number: AVNYAQ0O20EPBP
• Model: GT Premium Version
• Construction: 1-piece forged aluminium
• Finish: Machining & Hyper Platinum Black
• Diameter: 20"
• Width: 12.0"
• Offset (ET): +20mm
• Bolt Pattern: 5x114.3
• Centre Bore: 73mm
• Quantity: Single wheel (1 wheel per listing)
• Weight: 30 lbs (shipping weight)

Fitment Information:

• 5x114.3 bolt pattern — 73mm centre bore — 20x12.0 +20ET
• Compatible with any vehicle using a 5x114.3 bolt pattern with a hub bore of 73mm or smaller (hub centric rings available for smaller hub bores)
• Note: 20x12.0 +20ET is an aggressive, wide fitment specification — verify clearance with your specific vehicle's suspension, fenders, and body configuration before ordering. Wide-body fenders, camber adjustment, and/or suspension modification will likely be required for correct fitment on most vehicles. Hub centric rings are required if your vehicle's hub bore is smaller than 73mm. This listing is for a single wheel — order the correct quantity for your application.

What's Included:

• 1x Advan GT Premium Version forged wheel — 20x12.0 +20ET 5x114.3 73mm — Machining & Hyper Platinum Black (AVNYAQ0O20EPBP)
• Valve stem included — refer to Advan's product documentation for complete contents
• Wheel hardware (lug nuts/bolts) not included — source the correct hardware for your specific vehicle

Installation Notes:

• Professional installation by an experienced wheel and tyre specialist recommended — forged wheels require correct torque at the lug nuts/bolts and correct hub centric ring fitment for safe operation
• Use hub centric rings if your vehicle's hub bore is smaller than 73mm — hub centric rings ensure the wheel is centred on the hub rather than on the lug hardware, preventing vibration and ensuring correct load distribution
• Torque lug nuts/bolts to the correct specification for your vehicle — do not use an impact wrench without a torque stick — over-torquing can damage the wheel's lug seat
• Re-torque lug nuts/bolts after the first 50-100km of driving — thermal cycling can cause lug hardware to settle after initial installation
• Verify correct tyre fitment for the 20x12.0 rim width — consult a tyre specialist for the correct tyre width and profile for this rim specification

Why Advan?

Advan is Yokohama's performance brand — one of the most respected wheel and tyre brands in Japanese motorsport, with decades of Super GT, Super Formula, and time attack development experience. Advan's GT Premium Version is the result of that motorsport heritage — a forged wheel that combines the GT's proven spoke geometry and forged construction with the Premium Version's elevated finishing details. For performance builds that demand the highest level of Japanese forged wheel quality, motorsport heritage, and visual presence, Advan GT Premium Version is the definitive choice.

Perfect For:

• Wide-body and aggressive fitment builds on 5x114.3 platforms where the 20x12.0 +20ET specification provides the correct track width and tyre contact patch for the build's performance and aesthetic goals
• High-performance track and time attack builds where Advan's forged construction, motorsport heritage, and GT Premium Version's weight and strength credentials are the correct wheel choice
• Premium street builds where the Advan GT Premium Version's Machining & Hyper Platinum Black finish and motorsport-derived design are the centrepiece of the wheel and tyre setup

Note: Single wheel per listing — order correct quantity. 20x12.0 +20ET is an aggressive specification — verify fitment carefully before ordering. Hub centric rings required if hub bore is smaller than 73mm. Correct lug hardware not included — source separately. Re-torque after first 50-100km.