ARP Extended Wheel Studs – Nissan 350Z / 370Z / GT-R R35 | Infiniti G35 / G37 | M12x1.25 | 100-7716

ARP 100-7716 extended wheel studs for the Nissan 350Z (Z33), 370Z (Z34), GT-R (R35), and Infiniti G35 (V35) / G37 (V36). M12x1.25 thread pitch, 0.565” knurl diameter. Press-in replacement for the factory wheel studs. Required for wheel spacer installations where OEM stud length is insufficient for proper lug nut thread engagement.

Confirm the quantity included per package and required stud length before ordering — extended studs are available in multiple lengths. Match stud length to your spacer thickness plus required lug nut thread engagement depth.

ARP Wheel Studs

ARP (Automotive Racing Products) manufactures fasteners to motorsport specification — their wheel studs are used in OEM homologation builds, professional racing, and high-performance street applications globally. ARP studs are manufactured from premium alloy steel, heat-treated to consistent tensile strength specifications, and held to tighter dimensional tolerances than OEM replacement studs. For any application where wheel fastener integrity matters — track use, high-load cornering, or spacer installations that extend the stress lever arm on the stud — ARP is the correct choice over budget aftermarket or OEM replacements.

Extended Length — Wheel Spacer Requirement

Extended wheel studs are required when using wheel spacers. A spacer adds thickness between the hub face and the wheel mounting face — the lug nut must thread past the full spacer thickness before engaging the wheel. OEM-length studs may not provide sufficient exposed thread past the spacer for the minimum thread engagement depth required for safe lug nut clamping force. Extended studs provide the additional stud length needed to maintain proper thread engagement through the spacer plus lug nut stack. Match the stud length to your spacer thickness, ensuring a minimum of 1x stud diameter (12mm) of thread engagement beyond the spacer face.

Fitment Specifications

• Thread Pitch: M12x1.25 — standard Nissan/Infiniti RWD thread pitch for these platforms. Lug nuts must be M12x1.25 — not compatible with M12x1.5
• Knurl Diameter: 0.565” — press-fit diameter matching the OEM hub stud bore on these platforms. Must match the hub bore for correct retention
• Installation: Press-in — ARP studs press into the existing hub stud holes, replacing the factory studs. Can be installed using a hydraulic press or drawn in using the lug nut and socket method (thread a lug nut on, stack washers, tighten to draw the stud into the hub)

Fitment

• Nissan 350Z (Z33)
• Nissan 370Z (Z34)
• Nissan GT-R (R35)
• Infiniti G35 (V35)
• Infiniti G37 (V36)

Confirm package quantity (per wheel or full set) before ordering. Match extended stud length to spacer thickness plus minimum thread engagement requirement. Use M12x1.25 lug nuts only. Torque lug nuts to vehicle manufacturer’s specification using a calibrated torque wrench. Re-torque after first 50–100 km. Professional installation recommended for stud pressing.

Specifications

• Brand: ARP
• Part Number: 100-7716
• Thread Pitch: M12x1.25
• Knurl Diameter: 0.565”
• Installation: Press-in
• Application: Nissan 350Z / 370Z / GT-R R35 | Infiniti G35 / G37