Enkei PF01 Wheel – 17x7 +48 | 5x114.3 | 75mm Bore | Silver | Single Wheel

The Enkei PF01 in 17x7 +48 5x114.3 Silver is a single wheel from one of the most respected lightweight cast wheel designs in the Japanese performance and motorsport aftermarket — the PF01's clean multi-spoke design and Enkei's MAT (Most Advanced Technology) casting process produce a wheel that is significantly lighter than conventional cast alternatives, making it a popular choice for track day, time attack, and performance street applications where unsprung weight reduction is a priority. This listing is for a single wheel — order the quantity required for your application. The 75mm centre bore is a key specification for hub-centric fitment — verify your vehicle's hub bore diameter before ordering.

Key Features:

• Enkei PF01 design — one of the most respected lightweight cast wheel designs in the Japanese performance and motorsport aftermarket — a clean, purposeful multi-spoke layout optimized for weight reduction and structural efficiency
• Enkei MAT casting process — Enkei's Most Advanced Technology (MAT) casting process produces a denser, stronger aluminium structure than conventional gravity casting — allowing thinner, lighter spokes without sacrificing structural integrity
• Lightweight construction — the PF01's MAT casting and spoke design produce a wheel that is significantly lighter than conventional cast alternatives — reduced unsprung weight for improved acceleration, braking, and suspension response
• Silver finish — classic silver finish that complements a wide range of vehicle colours and build aesthetics — a clean, purposeful appearance that suits both track and street applications
• 17x7 +48 — a moderate width and offset combination suited to a range of 5x114.3 platforms — correct for many Japanese performance vehicles in stock or mildly modified form
• 5x114.3 bolt pattern — the most common bolt pattern in the Japanese performance market — correct for Nissan, Honda, Toyota, Mazda, Subaru, Mitsubishi, Infiniti, and many other platforms
• 75mm centre bore — verify your vehicle's hub bore diameter — hub-centric rings may be required for correct fitment on vehicles with a smaller hub bore
• Single wheel — priced and sold per wheel — order the quantity required for your application (typically 4 for a full set)

Enkei MAT Technology — Why It Matters:

Enkei's MAT (Most Advanced Technology) casting process uses high-pressure casting to produce a denser, more uniform aluminium grain structure than conventional low-pressure or gravity casting methods. The denser structure is stronger per unit of material — allowing Enkei's engineers to design thinner, lighter spokes and barrel sections without reducing the wheel's structural integrity or load rating. The result is a cast wheel that approaches the weight of some forged alternatives at a significantly lower price point — making the PF01 one of the most weight-efficient cast wheels available for track and performance street applications. For drivers who want the weight reduction benefits of a lightweight wheel without the cost of a forged alternative, the Enkei PF01 is one of the most compelling options in the cast wheel market.

Fitment Specifications:

• Diameter: 17"
• Width: 7"
• Offset: +48mm
• Bolt Pattern: 5x114.3
• Centre Bore: 75mm
• Finish: Silver
• Construction: Cast (Enkei MAT process)
• Part Number: ENK460-770-6548SP
• Quantity: Single wheel — order quantity as required
• Weight: 20 lbs (shipping weight per wheel)

Fitment Guidance:

• Bolt pattern 5x114.3 — compatible platforms include Nissan 350Z/370Z (Z33/Z34), Infiniti G35/G37, Honda Civic/Accord, Mazda RX-7/RX-8/MX-5, Toyota 86/GR86, Subaru BRZ, Mitsubishi Lancer Evolution, and many others — verify your specific vehicle's bolt pattern before ordering
• 17x7 +48 fitment notes: A 7" wide wheel at +48mm offset is a conservative, OEM-adjacent fitment — correct for many 5x114.3 platforms in stock or mildly modified form without clearance concerns. Verify clearance with your specific vehicle's fender, suspension, and brake caliper before ordering.
• 75mm centre bore: The PF01's 75mm centre bore is hub-centric for vehicles with a 75mm hub bore diameter. For vehicles with a smaller hub bore (e.g., 66.1mm for many Honda applications, 67.1mm for many Nissan applications), hub-centric rings are required to correctly centre the wheel on the hub and eliminate vibration. Always use hub-centric rings when the wheel's bore is larger than the vehicle's hub bore.
• Critical: Always verify wheel fitment — diameter, width, offset, bolt pattern, and hub bore — for your specific vehicle before ordering. Incorrect fitment can result in clearance issues, vibration, or unsafe wheel installation.

Why Enkei?

Enkei is one of Japan's most respected wheel manufacturers — with a motorsport heritage spanning Formula 1, Super GT, and Super Formula, and a product lineup that covers OEM supply, performance street, and competition applications. Enkei's MAT casting technology is the foundation of their performance wheel lineup — a manufacturing process that produces lighter, stronger cast wheels than conventional alternatives. The PF01 is one of Enkei's most enduring designs — a wheel that has been a benchmark lightweight cast option for track day and time attack builds for years, trusted by drivers who want genuine weight reduction without the cost of a forged wheel.

Perfect For:

• 5x114.3 Japanese performance platforms where the Enkei PF01's lightweight MAT cast construction provides meaningful unsprung weight reduction for track day, time attack, and performance street use
• 17x7 +48 fitment applications where a conservative, OEM-adjacent offset provides correct clearance on stock or mildly modified suspension
• Drivers who want the weight reduction benefits of a lightweight cast wheel at a competitive price point relative to forged alternatives
• Track day and time attack builds where the PF01's motorsport heritage, lightweight construction, and clean silver finish are the correct wheel choice

Note: Single wheel — order quantity as required for your application. Always verify diameter, width, offset, bolt pattern, and hub bore fitment for your specific vehicle before ordering. Hub-centric rings required if vehicle hub bore is smaller than 75mm — verify for your application. Confirm brake caliper clearance for your specific caliper before ordering.