Gram Lights 57CR Limited 17x9.0 | 5x114.3 Bolt Pattern | +12 Offset | Black Metal Coat Finish | RAYS Forged | Deep Concave 5-Spoke

The Gram Lights 57CR Limited in 17x9.0 with 5x114.3 bolt pattern, +12 offset, and Black Metal Coat finish is a RAYS-forged deep concave 5-spoke wheel in an aggressive low-offset fitment specification — the 17" diameter variant of the iconic 57CR Limited, engineered for builds running 17" tyres, track-focused applications where tyre selection over diameter is the priority, or owners who prefer the classic 17" wheel aesthetic on their 5x114.3 platform. The "Limited" designation marks this as a special edition variant of the iconic 57CR design. The +12 offset on a 9.0" wide wheel positions the wheel face aggressively close to the outer fender lip — delivering a flush, aggressive stance that demands careful clearance verification. Black Metal Coat is RAYS' dark metallic finish — a deep, dark grey metallic that suits a wide range of vehicle colours and build aesthetics. Gram Lights is RAYS Engineering's performance wheel sub-brand — RAYS is the most respected Japanese forged wheel manufacturer in the world, with decades of motorsport heritage across Super GT, Formula Drift, and global circuit racing.

Key Features:

• 57CR Limited design — Gram Lights' iconic 57CR deep concave 5-spoke wheel in the Limited special edition variant — one of the most recognized and sought-after JDM wheel designs in the performance and stance community
• RAYS forged construction — manufactured by RAYS Engineering using their forging process — forged aluminium provides superior strength-to-weight ratio compared to cast wheels, allowing thinner spokes and a lighter wheel without sacrificing structural integrity
• Deep concave face — the 57CR's defining characteristic — a pronounced deep concave dish that creates a premium, motorsport-inspired wheel appearance
• 17x9.0 sizing — 17" diameter, 9.0" width — the 17" variant of the 57CR Limited — correct for builds running 17" tyres, track applications prioritizing tyre selection, or owners who prefer the 17" aesthetic
• 5x114.3 bolt pattern — the most common JDM and performance bolt pattern — correct for a wide range of Japanese performance platforms including Nissan, Toyota, Honda, Subaru, and Mitsubishi applications
• +12 offset — aggressive low positive offset — positions the wheel face close to the outer fender lip for a flush, aggressive stance — verify correct fitment with your specific vehicle's suspension geometry, brake caliper clearance, and fender clearance before ordering
• Black Metal Coat finish — RAYS' Black Metal Coat — a deep, dark grey metallic finish that provides a premium, understated appearance that suits a wide range of vehicle colours and build directions
• RAYS / Gram Lights quality — manufactured by RAYS Engineering, the most respected Japanese forged wheel manufacturer in the world

17" vs. 18" — Choosing the Right Diameter:

• 17x9.0 +12 (this wheel): Correct for builds running 17" tyres — a wider range of performance tyre options in 17", particularly for track use where tyre selection is the priority. The 17" diameter also provides a slightly taller sidewall for a given tyre width, which can improve ride quality and kerb impact resistance.
• 18x9.5 +12: The larger diameter option — correct for builds where the 18" aesthetic is preferred and 18" tyre fitments are the target.

+12 Offset — Fitment Context:

A +12 offset on a 9.0" wide wheel is an aggressive, low-offset specification. The low offset pushes the wheel face outward toward the fender lip, creating a flush or near-flush stance. This aggressive offset requires careful fitment verification:

• Fender clearance: The outer edge of the tyre will sit close to or flush with the fender lip — verify adequate clearance at full suspension compression and full steering lock. Fender rolling or pulling may be required.
• Suspension clearance: Verify adequate clearance between the inner barrel and suspension components at full compression.
• Brake caliper clearance: Verify adequate clearance between the wheel spokes and the brake caliper.

A professional wheel fitment specialist should verify correct fitment before installation on your specific vehicle.

Specifications:

• Brand: Gram Lights (RAYS Engineering)
• Part Number: GLSWGCRQ12ERB
• Barcode: 58527901295RB
• Model: 57CR Limited
• Construction: RAYS forged
• Spoke Count: 5-spoke
• Diameter: 17"
• Width: 9.0"
• Bolt Pattern: 5x114.3
• Offset: +12mm
• Finish: Black Metal Coat
• Weight: 26 lbs (shipping weight)

Fitment Information:

• 5x114.3 bolt pattern — correct for a wide range of Nissan, Toyota, Honda, Subaru, Mitsubishi, and other JDM performance platforms
• Verify your specific vehicle's hub bore diameter — hub-centric rings may be required if your vehicle's hub diameter differs from the wheel's bore
• Note: The +12 offset is an aggressive specification — verify correct fender clearance, suspension clearance, and brake caliper clearance for your specific vehicle before ordering. Fender rolling or pulling may be required. A professional wheel fitment specialist should verify correct fitment before installation. This listing is for a single wheel.

What's Included:

• 1x Gram Lights 57CR Limited 17x9.0 +12 5x114.3 Black Metal Coat wheel (GLSWGCRQ12ERB)
• Centre cap — refer to RAYS/Gram Lights product documentation for included hardware

Installation Notes:

• Professional installation by an experienced wheel and tyre specialist strongly recommended
• Verify correct torque specification for your vehicle's wheel fasteners — use a calibrated torque wrench — do not use an impact gun to final-torque wheel fasteners
• Re-torque wheel fasteners after the first 50–100km of driving following installation
• Verify fender clearance at full suspension compression and full steering lock before driving — the +12 offset may require fender rolling or pulling on some vehicles
• Hub-centric rings may be required — verify your vehicle's hub diameter and use the correct hub-centric ring if needed
• A four-wheel alignment is recommended after wheel and tyre changes

Why Gram Lights / RAYS?

Gram Lights is RAYS Engineering's performance wheel sub-brand — RAYS is the most respected Japanese forged wheel manufacturer in the world, with decades of motorsport heritage across Super GT, Formula Drift, WTCC, and global circuit racing. RAYS' forging technology and quality control are the benchmark for Japanese performance wheels — every RAYS wheel is manufactured in Japan to exacting quality standards. The 57CR is one of Gram Lights' most iconic and enduring designs — a deep concave 5-spoke wheel that has defined the JDM performance wheel aesthetic for over a decade. For 5x114.3 platform owners who want the most iconic JDM forged wheel design in an aggressive +12 low-offset 17" fitment with RAYS' Black Metal Coat finish, GLSWGCRQ12ERB is the correct choice.

Perfect For:

• 5x114.3 platform owners who want the Gram Lights 57CR Limited's iconic deep concave 5-spoke design in a 17x9.0 +12 fitment with RAYS' Black Metal Coat finish — the 17" variant for track builds, tyre-selection-focused builds, or owners who prefer the classic 17" wheel aesthetic
• JDM performance and track builds where the 57CR Limited's deep concave face, RAYS forged construction, and Black Metal Coat finish deliver a premium, motorsport-inspired wheel in a 17" diameter with an aggressive +12 low-offset stance
• Owners who want RAYS Engineering's proven forged wheel quality in the iconic 57CR Limited design — manufactured in Japan to RAYS' exacting quality standards in the 17x9.0 specification

Note: Single wheel listing. +12 offset is aggressive — verify fender, suspension, and caliper clearance for your specific vehicle before ordering. Fender rolling may be required. Hub-centric rings may be required. Professional fitment specialist verification strongly recommended before installation. Re-torque after first 50–100km.