{"product_id":"konig-forged-f3s-18x9-5-5x120-et35-satin-charcoal","title":"Konig Forged F3S | 18x9.5 | 5x120 | ET35 | Satin Charcoal | Forged Monoblock | F3SN852035G","description":"\u003ch2\u003eKonig Forged F3S – 18x9.5 | 5x120 | ET35 | Satin Charcoal | Forged Monoblock\u003c\/h2\u003e\n\u003cp\u003eThe Konig Forged F3S in 18x9.5 5x120 ET35 Satin Charcoal is a wide 18\" forged monoblock wheel engineered for BMW 5x120 applications — including the 3 Series, 5 Series, and M3. At 18x9.5 with an ET35 offset, this is a wider 18\" fitment suited for staggered rear setups or square performance builds where a wider tyre contact patch and more aggressive stance are the priority. Pairs with the 18x8.5 ET32 F3S for a front\/rear staggered fitment on BMW platforms. Konig's forged monoblock construction delivers a meaningful weight advantage over cast alternatives, with the structural integrity required for high-performance street and track use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ Bolt Pattern Note – 5x120 (BMW Standard):\u003c\/strong\u003e This wheel uses a \u003cstrong\u003e5x120mm bolt pattern\u003c\/strong\u003e — the standard BMW bolt circle used across a wide range of BMW 3 Series, 5 Series, M3, and other BMW models. This is \u003cstrong\u003enot the same as 5x120.65mm\u003c\/strong\u003e (GM\/Chevrolet). Verify your vehicle's exact bolt pattern specification before ordering.\u003c\/p\u003e\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 18\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 9.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 5x120mm (BMW)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset:\u003c\/strong\u003e ET35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Satin Charcoal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Forged Monoblock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e F3SN852035G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 43482230879\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Monoblock Construction – Lightweight \u0026amp; High Strength:\u003c\/strong\u003e Konig Forged F3S is built using a forged monoblock process — a single piece of aluminum alloy forged under high pressure for superior grain structure, strength, and weight reduction compared to cast or flow-formed wheels. Forged construction is the preferred choice for performance and track applications where unsprung weight reduction directly improves handling response and ride quality\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18x9.5 ET35 – Wide 18\" Performance Fitment:\u003c\/strong\u003e 18\" diameter, 9.5\" width, and ET35 offset is a wide 18\" fitment for BMW 5x120 platforms — suited for staggered rear setups (pairs with the 18x8.5 ET32 F3S front) or square builds where a wider tyre contact patch and more aggressive rear stance are the priority. Verify fitment against your specific vehicle's rear fender clearance, suspension geometry, and centre bore requirements before ordering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x120 – BMW Standard Bolt Pattern:\u003c\/strong\u003e 5x120mm is the standard bolt circle used across a wide range of BMW models including the 3 Series (E46, E90, F30, G20), 5 Series, M3, and others. Verify your specific BMW model's bolt pattern, centre bore, and offset requirements before ordering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatin Charcoal Finish – Premium Understated Aesthetic:\u003c\/strong\u003e Satin charcoal finish delivers a premium, low-gloss dark appearance that complements a wide range of BMW colours — matches the 18x8.5 ET32 F3S for a consistent staggered set appearance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKonig Forged Quality:\u003c\/strong\u003e Manufactured by Konig — a respected wheel brand with a strong presence in the performance and motorsport aftermarket, known for quality forged wheel construction and competitive pricing in the forged segment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ Fitment Verification Required:\u003c\/strong\u003e Verify your specific BMW model's bolt pattern (5x120mm), centre bore, offset requirements, and rear fender clearance before ordering. BMW centre bore is typically 72.6mm — confirm your specific model's centre bore and use hub-centric rings if required. This wheel is sold individually — verify whether you need a single wheel or a complete staggered set (pairs with the 18x8.5 ET32 F3S for a front\/rear staggered fitment). Consult a fitment specialist before purchasing tyres for a 9.5\" wide 18\" wheel.\u003c\/p\u003e","brand":"Konig","offers":[{"title":"Default Title","offer_id":51256516313255,"sku":"KNGF3SN852035G","price":691.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/8344\/1063\/files\/KonigF3S0952036G.jpg?v=1787623059","url":"https:\/\/www.straightsiximports.com\/en-us\/products\/konig-forged-f3s-18x9-5-5x120-et35-satin-charcoal","provider":"Straight Six Imports","version":"1.0","type":"link"}