{"product_id":"racequip-pro-series-shield-clear-1","title":"RaceQuip PRO Series Helmet Shield | Clear | SA-Rated PRO \u0026 PRO Youth | 204001RQP","description":"\u003ch2\u003eRaceQuip PRO Series Helmet Shield – Clear | 3mm Polycarbonate | 204001RQP\u003c\/h2\u003e\n\n\u003cdiv style=\"border-left: 4px solid #333; padding: 10px 16px; margin-bottom: 16px; background: #f9f9f9;\"\u003e\n\u003cp\u003e\u003cstrong\u003eFits RaceQuip PRO Series SA-rated helmets (PRO20, PRO25) and SFI-24.1-rated PRO Youth Series helmets only.\u003c\/strong\u003e Not compatible with RaceQuip VELA, VELA Sport, or other non-PRO helmet lines. Confirm your helmet is a PRO Series or PRO Youth Series before ordering. Includes visor strip and tear-off posts. Tear-off films sold separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp\u003eRaceQuip 204001RQP PRO Series replacement shield in clear. The all-conditions baseline shield — maximum light transmission, distortion-free optics, 3mm high-strength polycarbonate. The correct shield for indoor facilities, night racing, overcast conditions, and any session where unmodified light transmission is preferred over tint or mirror coating. Visor strip and tear-off posts included. Ships fast across Canada and the US.\u003c\/p\u003e\n\n\u003ch3\u003eClear Shield — When It’s the Right Choice\u003c\/h3\u003e\n\u003cp\u003eClear is the standard shield and the highest-priority spare to carry. Within the RaceQuip PRO Series shield range:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear (this listing):\u003c\/strong\u003e Maximum light transmission — no tint, no coating, no reduction in visible light. Correct for indoor karting tracks, night or twilight endurance sessions, overcast-day racing, and any condition where reducing available light would compromise visibility. Also the correct default for drivers who find tinted shields disorienting or who race across varied lighting conditions in a single event. Ships as the standard shield on most PRO Series helmets — this listing is the direct replacement for that factory shield.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Iridium (separate listing):\u003c\/strong\u003e Mirror coating for direct sunlight. Reduces glare and UV in bright outdoor conditions. Not for low-light or night use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDark Smoke:\u003c\/strong\u003e Moderate tint, non-mirrored. Light reduction without reflective coating. For bright conditions where a full mirror is not desired.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmber:\u003c\/strong\u003e Contrast-enhancing tint for low-light and night racing. Improves target definition under artificial or fading natural light.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA clear shield as a carried spare is standard practice for endurance racing and multi-session track days where conditions change — starting a morning session in overcast conditions with the clear, then switching to Blue Iridium when afternoon sun arrives, without returning to the paddock for a full helmet swap.\u003c\/p\u003e\n\n\u003ch3\u003eShield Construction — 3mm Polycarbonate\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3mm thickness:\u003c\/strong\u003e The specification required for Snell SA helmet compliance. Consistent with the shield that ships standard with the PRO20 and PRO25 — replacing the factory shield with the 204001RQP maintains the helmet’s optical and impact standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion-free optics:\u003c\/strong\u003e Optically flat across the full eye port. In the clear shield, optical quality is particularly critical — any distortion is immediately visible without the masking effect of tint or mirror coating. RaceQuip’s 3mm polycarbonate meets the Snell SA certification optical standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-strength polycarbonate:\u003c\/strong\u003e Impact-resistant material that deflects rather than shatters on debris contact. Polycarbonate is significantly stronger than acrylic and provides meaningful face and eye protection against gravel, debris, and contact.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIncluded Hardware\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisor strip:\u003c\/strong\u003e Foam\/rubber seal for the top edge of the shield, preventing gap airflow and dust infiltration at the shield-to-helmet interface. Always replace the visor strip when installing a new shield.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTear-off posts:\u003c\/strong\u003e Anodised aluminium posts that mount to the shield’s 8-position ratchet anchors and retain tear-off film layers. Included — tear-off films sold separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePRO Series Helmet Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRaceQuip PRO Series SA-rated adult helmets — PRO20 (SA2020), PRO25 (SA2025)\u003c\/li\u003e\n\u003cli\u003eRaceQuip PRO Youth Series SFI-24.1-rated youth helmets\u003c\/li\u003e\n\u003cli\u003eNot compatible with VELA, VELA Sport, or other non-PRO RaceQuip helmet lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eClear — maximum light transmission, all conditions. Fits PRO Series SA-rated (PRO20, PRO25) and PRO Youth SFI-24.1 helmets only. Not for VELA or other non-PRO lines. 3mm distortion-free polycarbonate. Visor strip and tear-off posts included. Tear-off films sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: RaceQuip\u003c\/li\u003e\n\u003cli\u003ePart Number: 204001RQP\u003c\/li\u003e\n\u003cli\u003eType: Replacement helmet shield\u003c\/li\u003e\n\u003cli\u003eLens material: 3mm distortion-free high-strength polycarbonate\u003c\/li\u003e\n\u003cli\u003eTint \/ coating: Clear — no tint, no coating\u003c\/li\u003e\n\u003cli\u003eRecommended conditions: All conditions — indoor, night, overcast, varied lighting\u003c\/li\u003e\n\u003cli\u003eHelmet compatibility: RaceQuip PRO Series SA-rated (PRO20, PRO25) and PRO Youth SFI-24.1\u003c\/li\u003e\n\u003cli\u003eIncludes: Visor strip, tear-off posts\u003c\/li\u003e\n\u003cli\u003eTear-off films: Not included — sold separately\u003c\/li\u003e\n\u003cli\u003eWeight: 0.37 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Racequip","offers":[{"title":"Default Title","offer_id":51447330865319,"sku":"RQP204001RQP","price":63.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/8344\/1063\/files\/f03a305b53cb06739d82f3b31dc6e2d3L.jpg?v=1790841536","url":"https:\/\/www.straightsiximports.com\/en-us\/products\/racequip-pro-series-shield-clear-1","provider":"Straight Six Imports","version":"1.0","type":"link"}