This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

Free Shipping on most items over $150 (excluding freight/oversized items)

ACT Xtreme Street Sprung Clutch Kit, Nissan 370Z 2009–2020 | NZ2-XTSS

$750.00 CAD $1,264.20 CAD
SKU: NZ2-XTSS
1 available
SAVE 20% WITH CODE Save20 AT CHECKOUT

Valid until November 30, 2026 at 11:59 PM EST



Free shipping on most orders over $150

ACT Xtreme Performance Street Sprung Clutch Kit | NZ2-XTSS

The ACT NZ2-XTSS pairs an Xtreme pressure plate with a Performance Street sprung-hub organic disc for Nissan 370Z applications. This listing covers the 2009–2020 370Z application. Ships fast across Canada and the US.

Installation planning: Confirm the exact vehicle, flywheel and clutch-release system before ordering. Check any additional flywheel, hydraulic or fastening components required for your installation. An Xtreme pressure plate can change pedal effort; quiet operation is not guaranteed.

Application

  • Nissan 370Z, 2009–2020.
  • Modified driveline combinations require separate compatibility checks.

Included Components

  • N024X Xtreme pressure plate.
  • 3000409 clutch disc.
  • PB1012 pilot bushing.
  • AT01 clutch alignment tool.

Specifications

  • Brand: ACT, Advanced Clutch Technology.
  • Manufacturer part number: NZ2-XTSS.
  • Pressure plate: Xtreme.
  • Disc: Performance Street, sprung hub.
  • Friction material: Organic.
  • Disc diameter: 250 mm.
  • Input shaft diameter: 1 inch.
  • ACT published torque capacity: 545 lb-ft.
  • ACT published torque capacity over OE: 89%.

The torque figure is ACT's clutch capacity rating, not a wheel-torque claim or an engine-output guarantee. Select the clutch for the engine's actual torque and intended use, allowing an appropriate margin.

Street-Oriented Disc Design

The sprung-hub organic disc provides a street-oriented alternative to a puck-style race disc. The Xtreme pressure plate increases holding capability, but pedal feel, engagement and driveline noise depend on the complete vehicle setup. Do not interpret the sprung hub as a guarantee of stock pedal effort or silent operation.

Installation and Break-In

Professional installation is recommended. Inspect the flywheel, hydraulic release system and pilot support, and verify the correct flywheel specification and surface condition with ACT before installation. Do not assume that every flywheel, including a factory dual-mass unit, can be conventionally resurfaced.

Follow the current ACT instructions for alignment, fastener tightening, release travel, hydraulic service and the required street-disc break-in procedure before hard launches or full-load use. Additional service parts may be required.

Ships fast across Canada and the US.

Free Shipping

Free shipping on orders over $150 with select exclusions.

No Customs Fees

Never get hit with surprise duty or brokerage fees again.

Dedicated Support

Friendly staff on hand who are fellow enthusiasts.