DeatschWerks Bosch EV14 Fuel Injectors - 95lb/hr 1000cc (48mm, Set of 6)

Maximize your engine's fuel delivery with DeatschWerks Bosch EV14 fuel injectors. Featuring genuine Bosch EV14 internals, 95lb/hr (1000cc) flow rate, and 48mm standard length, these precision-matched injectors deliver reliable high-flow performance for modified engines.

Key Features:

• 95lb/hr (1000cc) flow rate at 43.5 PSI
• Genuine Bosch EV14 internals
• 48mm standard length
• Universal fitment (14mm top O-ring)
• Set of 6 injectors (precision flow-matched)
• High-impedance design (12-16 ohms)
• Compatible with all fuel types (gas, E85, methanol)
• DeatschWerks quality and engineering

Performance Benefits:

• High Flow Capacity: 95lb/hr supports 550+ horsepower (gas) or 400+ horsepower (E85)
• Precision Matched: Flow-matched within 1-2% for balanced fuel delivery
• Bosch Quality: Genuine EV14 internals ensure reliability and longevity
• Universal Fitment: 48mm length and 14mm top O-ring fit most applications
• Fuel Compatible: Works with gasoline, E85, and methanol
• High Impedance: Compatible with most factory and aftermarket ECUs

Specifications:

• Brand: DeatschWerks
• Part Number: DWK17U-00-0095-6
• Product: Bosch EV14 Fuel Injectors
• Flow Rate: 95lb/hr (1000cc/min) at 43.5 PSI (3 bar)
• Length: 48mm (standard)
• Top O-Ring: 14mm (universal)
• Impedance: High (12-16 ohms)
• Connector: EV14 (USCAR/Bosch)
• Fuel Compatibility: Gasoline, E85, methanol
• Quantity: Set of 6 injectors
• Flow Matching: Within 1-2%
• Barcode: 00887753526526

Fitment Information:

• Application: Universal (6-cylinder engines)
• Length: 48mm standard length
• Top O-Ring: 14mm (most common size)
• Common Applications:
• Nissan RB25DET, RB26DETT, VQ35DE, VQ37VHR
• Toyota 2JZ-GTE, 1JZ-GTE, 7M-GTE
• BMW N54, N55, S54, S55
• Mitsubishi 6G72TT, 6A13TT
• Subaru EZ30, EZ36
• Honda J-series V6 engines
• IMPORTANT: Verify injector length and O-ring size for your application
• Note: May require injector adapters or spacers for some applications

What's Included:

• DeatschWerks Bosch EV14 fuel injectors (set of 6)
• O-rings and seals
• Injector data sheet with flow specifications
• Note: Injector clips/connectors may be required for some applications

Installation Notes:

• Professional installation and tuning required
• Verify injector length matches your fuel rail
• Check O-ring size compatibility with your fuel rail
• Replace all O-rings and seals during installation
• Lubricate O-rings with clean engine oil before installation
• ECU tuning required - injectors must be calibrated for proper air/fuel ratios
• Verify fuel pump can support increased flow demand

95lb/hr (1000cc) Flow Rate:

The 95lb/hr (1000cc/min) flow rate is measured at 43.5 PSI (3 bar) fuel pressure, which is the industry standard for fuel injector ratings. This flow rate supports approximately 550+ horsepower on gasoline or 400+ horsepower on E85 (assuming 0.55 BSFC for gas, 0.75 BSFC for E85, and 80% duty cycle). The high flow capacity makes these injectors ideal for turbocharged and supercharged builds, big-displacement naturally aspirated engines, and E85 conversions.

Genuine Bosch EV14 Internals:

DeatschWerks injectors feature genuine Bosch EV14 internals, ensuring the same quality and reliability as OEM Bosch injectors. The EV14 design uses a compact solenoid and precision-machined pintle for excellent atomization and linear flow characteristics. Bosch is the world leader in fuel injection technology, and their EV14 platform is used by major automotive manufacturers worldwide. By using genuine Bosch internals, DeatschWerks ensures their injectors deliver OEM-level reliability and performance.

48mm Standard Length:

The 48mm length is considered "standard" and fits most fuel rail applications. This length is common on many Japanese, European, and domestic performance vehicles. The 48mm measurement is the overall length of the injector body, not including the connector. Always verify your fuel rail's injector pocket depth to ensure proper fitment - injectors that are too long or too short can cause sealing issues or clearance problems.

Precision Flow-Matched:

Each set of DeatschWerks injectors is precision flow-matched within 1-2% of each other. This tight tolerance ensures balanced fuel delivery across all cylinders, preventing rich or lean conditions that can damage engines. Flow-matching is critical for performance applications where precise air/fuel ratios are essential for maximum power and reliability. Each set includes a data sheet showing the actual flow rate of each injector.

High-Impedance Design:

The high-impedance design (12-16 ohms) makes these injectors compatible with most factory and aftermarket ECUs without requiring resistor boxes or special wiring. High-impedance injectors are easier to control and generate less electrical noise than low-impedance injectors. This design is ideal for street cars and builds using factory ECUs or standalone engine management systems.

Fuel Compatibility:

DeatschWerks injectors are compatible with gasoline, E85 ethanol, and methanol fuels. The internal components are engineered to withstand the corrosive properties of alcohol-based fuels, making these injectors suitable for flex-fuel applications and race fuel use. This versatility ensures the injectors can handle whatever fuel your application requires.

Universal Fitment:

The 14mm top O-ring size is the most common fitment for performance fuel rails. The universal design allows these injectors to work with a wide range of vehicles and aftermarket fuel rails. However, always verify your fuel rail's O-ring size and injector pocket depth before ordering. Some applications may require injector adapters, spacers, or different O-ring sizes.

Why DeatschWerks?

DeatschWerks is a leading manufacturer of high-performance fuel system components, known for quality, innovation, and value. Their injectors use genuine Bosch internals and are precision flow-matched to ensure reliable performance. DeatschWerks products are trusted by professional tuners, engine builders, and enthusiasts worldwide for their quality and performance.

Tuning Requirements:

• ECU tuning required after installation
• Injector scaling/calibration must be updated in ECU
• Base fuel pressure should be set to 43.5 PSI (3 bar) for rated flow
• Verify fuel pump can support increased flow demand
• Dyno tuning recommended for optimal air/fuel ratios
• Monitor air/fuel ratios during initial tuning

Perfect For:

• 6-cylinder turbocharged and supercharged builds requiring high flow
• E85 conversions needing increased fuel delivery
• Big-displacement naturally aspirated engines
• Engine swaps requiring custom fuel system solutions
• Anyone upgrading from stock or lower-flow injectors

Perfect For: 6-cylinder performance builds seeking DeatschWerks Bosch EV14 fuel injectors with 95lb/hr (1000cc) flow rate and universal fitment.

Pro Tip: Always verify injector length and O-ring size for your application. ECU tuning is required for proper operation.

Set of 6: Precision flow-matched within 1-2%. Genuine Bosch EV14 internals. Compatible with gas, E85, and methanol.

Upgrade your fuel system with DeatschWerks Bosch EV14 injectors - 95lb/hr, 48mm, high-flow, precision-matched, proven reliability.