{"product_id":"dinan-00-03-bmw-m5-cold-air-intake","title":"Dinan Cold Air Intake | 2000-2003 BMW E39 M5 | S62 5.0L V8 | Includes Air Temp Sensor Relocation | CARB Exempt | D760-0390","description":"\u003ch2\u003eDinan Cold Air Intake – 2000–2003 BMW E39 M5 | S62 5.0L V8 | Includes Air Temp Sensor Relocation | D760-0390\u003c\/h2\u003e\n\u003cp\u003eThe Dinan cold air intake for the 2000–2003 BMW E39 M5 is one of the most technically sophisticated intake upgrades available for the S62 V8 — and one of the few that addresses a fundamental flaw in the factory intake system that BMW M5 owners may not even know is costing them power. Developed through exhaustive testing by Dinan, BMW’s only factory-authorized performance tuner in North America, this intake system doesn’t just improve airflow — it corrects a heat-soak problem in the factory Air Mass Meter that causes the S62’s engine management system to artificially reduce power output, particularly in stop-and-go traffic and urban driving conditions. The result is more power, more consistent performance, and a more accurate engine management system — all while maintaining your BMW factory warranty and CARB compliance.\u003c\/p\u003e\n\u003ch3\u003eThe Air Temp Sensor Problem – Why Your E39 M5 Is Making Less Power Than It Should\u003c\/h3\u003e\n\u003cp\u003eDuring development of this intake system, Dinan’s engineers made a significant discovery: the factory location of the air temperature sensor within the Air Mass Meter was providing the S62’s engine management system with an artificially elevated temperature reading — and the engine was responding by pulling timing and reducing power output.\u003c\/p\u003e\n\u003cp\u003eThe cause is heat soak. In stop-and-go traffic or any situation where adequate airflow is not continuously passing over the Air Mass Meter, the unit absorbs heat from the engine bay and its temperature rises well above the actual temperature of the incoming air. BMW’s sophisticated engine management system reads this elevated temperature and automatically retards ignition timing as a protective measure — reducing available power until airflow cools the Air Mass Meter back down. On a car as dynamically capable as the E39 M5, this means the engine is routinely operating below its potential in exactly the driving conditions where you’d want it performing at its best.\u003c\/p\u003e\n\u003cp\u003eThe Dinan intake system solves this with an \u003cstrong\u003eair temperature sensor relocation kit\u003c\/strong\u003e included as part of the system — moving the sensor to a position where it reads the actual temperature of the incoming air rather than the heat-soaked Air Mass Meter housing. The result is accurate temperature data, correct timing advance, and consistent power delivery regardless of traffic conditions.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir Temperature Sensor Relocation Kit Included:\u003c\/strong\u003e The defining feature of the Dinan intake for the E39 M5 — relocates the air temperature sensor to provide the engine management system with an accurate incoming air temperature reading, eliminating the heat-soak-induced timing retard that robs the S62 of power in real-world driving conditions. This is not a generic intake upgrade; it is a targeted correction of a specific factory deficiency on the E39 M5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Airflow to the S62 V8:\u003c\/strong\u003e The cold air intake system replaces the restrictive factory airbox and intake tract with a higher-flow design that draws cooler, denser air from outside the engine bay heat zone — increasing the volume and quality of air available to the S62’s 5.0L V8 across the RPM range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent Performance in All Conditions:\u003c\/strong\u003e By correcting the air temperature sensor reading, the Dinan intake delivers consistent power output regardless of ambient temperature, traffic conditions, or engine bay heat soak — eliminating the variable power delivery that characterises the factory setup in urban driving\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBMW Factory Warranty Safe:\u003c\/strong\u003e Dinan is BMW’s only factory-authorized performance tuner in North America — Dinan-branded parts are designed and validated to maintain your BMW factory warranty. Installing this intake will not void your BMW warranty coverage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCARB Exempt:\u003c\/strong\u003e The Dinan D760-0390 holds a CARB Executive Order exemption — legal for street use in California and all 50 US states\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDinan Engineering Quality:\u003c\/strong\u003e Developed through exhaustive dyno and real-world testing on the E39 M5 specifically — not adapted from a generic intake design. Every Dinan product is engineered, tested, and validated for the specific BMW application it is designed for\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW E39 M5 — S62 5.0L V8 (2000–2003)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Dinan\u003c\/li\u003e\n\u003cli\u003ePart Number: D760-0390\u003c\/li\u003e\n\u003cli\u003eType: Cold Air Intake System\u003c\/li\u003e\n\u003cli\u003eIncludes: Air Temperature Sensor Relocation Kit\u003c\/li\u003e\n\u003cli\u003eEngine: BMW S62 5.0L V8\u003c\/li\u003e\n\u003cli\u003eFitment: 2000–2003 BMW E39 M5\u003c\/li\u003e\n\u003cli\u003eCARB: Exempt (street legal all 50 states)\u003c\/li\u003e\n\u003cli\u003eWarranty: BMW factory warranty safe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Professional installation by a BMW-specialist shop is strongly recommended for this intake system. The air temperature sensor relocation requires careful routing and connection to ensure accurate readings and no fault codes. Verify CARB exemption status for your specific model year before installation in emissions-tested jurisdictions. Contact us if you have questions about compatibility with any existing Dinan tune or software on your vehicle.\u003c\/p\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":51264022544551,"sku":"DNND760-0390D","price":2099.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/8344\/1063\/files\/eb4a81cbd5ae0a85e78edcd43aac826dL.jpg?v=1787786688","url":"https:\/\/www.straightsiximports.com\/products\/dinan-00-03-bmw-m5-cold-air-intake","provider":"Straight Six Imports","version":"1.0","type":"link"}