{"product_id":"ebc-racing-93-02-toyota-supra-3-0tt-black-apollo-4-calipers-330mm-rotors-front-big-brake-kit","title":"EBC Racing Apollo-4 Front Big Brake Kit | Black Calipers | 330mm Rotors | 1993-2002 Toyota Supra JZA80 | BBK066BLK-1","description":"\u003ch2\u003eEBC Racing Apollo-4 Front Big Brake Kit – 1993–2002 Toyota Supra JZA80 | Black | 330mm | BBK066BLK-1\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eFront axle only — rear brakes are not included. Verify wheel inner barrel clearance before ordering — 330mm calipers require sufficient wheel clearance; minimum 17” wheels recommended but caliper fitment must be confirmed for your specific wheel design.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEBC Racing BBK066BLK-1 Apollo-4 front big brake kit for the 1993–2002 Toyota Supra (JZA80). Black anodised 4-piston monoblock aluminium calipers, 330mm slotted rotors, direct-fit brackets, and EBC brake pads included. 68 lbs. Ships fast across Canada and the US.\u003c\/p\u003e\n\u003ch3\u003eApollo-4 4-Piston Monoblock Calipers\u003c\/h3\u003e\n\u003cp\u003eEBC’s Apollo-4 calipers are fixed 4-piston monoblock units — machined from a single billet of aluminium rather than assembled from two bolted halves. Monoblock construction eliminates the flex point at the caliper split line, producing a stiffer caliper body that maintains consistent pad-to-rotor contact geometry under hard braking loads. Four pistons — two per side of the rotor — apply clamping force evenly across the full pad face, improving braking modulation and reducing the pad taper wear common with OEM sliding single-piston calipers. The result is more progressive, consistent brake feel at the pedal and more even pad wear across the service life of the pad.\u003c\/p\u003e\n\u003ch3\u003e330mm Slotted Rotors\u003c\/h3\u003e\n\u003cp\u003eThe 330mm rotor diameter is a significant step up from the JZA80 Supra’s factory front rotor size. The larger diameter increases the mechanical advantage (torque per unit of clamping force) for improved stopping power, adds rotor mass for greater heat absorption capacity during extended braking events, and increases the swept area available for heat dissipation. EBC’s rotors feature slots machined into the rotor face — slots evacuate hot gases, brake dust, and debris from the pad-to-rotor interface, maintaining consistent bite and preventing pad glazing under sustained hard braking.\u003c\/p\u003e\n\u003ch3\u003eWheel Clearance\u003c\/h3\u003e\n\u003cp\u003eThe Apollo-4 caliper and 330mm rotor combination requires sufficient wheel inner barrel clearance. Before ordering, verify that your wheels provide adequate clearance for the caliper body — minimum 17” diameter is a general baseline, but clearance is specific to the wheel’s spoke design and inner barrel depth. EBC provides a caliper dimension drawing on request — compare against your wheel’s inner barrel measurement or use a clearance template before committing to the kit.\u003c\/p\u003e\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEBC Apollo-4 4-piston monoblock calipers — black anodised (pair, front)\u003c\/li\u003e\n\u003cli\u003e330mm slotted rotors (pair, front)\u003c\/li\u003e\n\u003cli\u003eDirect-fit caliper mounting brackets\u003c\/li\u003e\n\u003cli\u003eEBC brake pads\u003c\/li\u003e\n\u003cli\u003eHardware and fitting kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1993–2002 Toyota Supra — JZA80\u003c\/li\u003e\n\u003cli\u003eApplicable to both 2JZ-GTE (3.0TT) and 2JZ-GE variants — confirm with EBC if running the NA variant\u003c\/li\u003e\n\u003cli\u003eFront axle only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eFront axle only — rear brakes not included. Verify wheel clearance before ordering. Bed new brake pads and rotors per EBC’s bedding procedure before hard use — skipping bedding on a BBK will glaze pads and significantly reduce initial braking performance. Brake fluid upgrade to at least DOT 4 or racing-spec fluid recommended for track use. Professional installation required.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: EBC Racing\u003c\/li\u003e\n\u003cli\u003ePart Number: BBK066BLK-1\u003c\/li\u003e\n\u003cli\u003eCaliper: Apollo-4 — 4-piston monoblock aluminium\u003c\/li\u003e\n\u003cli\u003eCaliper Finish: Black anodised\u003c\/li\u003e\n\u003cli\u003eRotor Diameter: 330mm\u003c\/li\u003e\n\u003cli\u003eRotor Type: Slotted\u003c\/li\u003e\n\u003cli\u003eAxle: Front only\u003c\/li\u003e\n\u003cli\u003eWeight: 68 lbs\u003c\/li\u003e\n\u003cli\u003eApplication: 1993–2002 Toyota Supra JZA80\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":51321162039463,"sku":"EBCBBK066BLK-1","price":3460.74,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/8344\/1063\/files\/94023586991117b05d1a1c0dfe3b2ac9L_fd5d9c04-52ab-4595-bdc3-6fefb5622981.jpg?v=1788979180","url":"https:\/\/www.straightsiximports.com\/products\/ebc-racing-93-02-toyota-supra-3-0tt-black-apollo-4-calipers-330mm-rotors-front-big-brake-kit","provider":"Straight Six Imports","version":"1.0","type":"link"}