ESR CR5 Wheel – 18x8.5 | 5x114.3 | +30mm Offset | 73.1mm Bore | Gloss Black | 88551430

ESR CR5 cast 5-spoke wheel in gloss black — 18x8.5, 5x114.3 bolt pattern, +30mm offset, 73.1mm hub bore. A clean, versatile street wheel for 5x114.3 platforms at an accessible price point. Confirmed brake calliper clearance for VW GTI Brembo (factory performance brakes) and Toyota AE86 TRD Brembo calipers in this size. Sold individually — confirm fitment dimensions for your specific vehicle before ordering.

Fitment — What to Confirm Before Ordering

• Bolt Pattern — 5x114.3: Five lugs on a 114.3mm (4.5”) pitch circle. Confirm your vehicle uses 5x114.3 — do not assume based on make alone. Common 5x114.3 platforms: Nissan 350Z/370Z/240SX, Subaru WRX/STI (2015+)/BRZ (2022+), Toyota 86/GR86, Mazda RX-7 FD/RX-8, Honda Civic (2022+)/Accord, Infiniti G35/G37. Note: VW GTI/Golf uses 5x112 — not compatible with this wheel despite the brake clearance note below
• Offset — +30mm: Moderate positive offset. Confirm +30mm provides adequate caliper and guard clearance for your specific vehicle, suspension setup, and tyre width. A wheel spacer can reduce effective offset if additional track width is desired
• Hub Bore — 73.1mm: Confirm your vehicle’s hub diameter. If smaller than 73.1mm, hub centric rings are required — most 5x114.3 vehicles will need them. Common hub diameters: Nissan 66.1mm, Honda/Acura 64.1mm, Mazda 67.1mm, Toyota 60.1mm, Subaru 56.1mm. Hub centric rings prevent vibration and ensure the wheel is centred on the hub, not on the lug nuts

Confirmed Brake Calliper Clearance

ESR has confirmed this wheel clears the following performance brake callipers in 18x8.5 +30:

• VW GTI factory Brembo callipers (note: GTI uses 5x112 — a 5x112 variant of this wheel would be required for GTI fitment)
• Toyota AE86 TRD Brembo callipers (note: AE86 uses 4x100 — a 4x100 variant would be required for AE86 fitment)

These clearance confirmations are relevant for builds that use these callipers on a 5x114.3 platform (e.g. a brake calliper swap). Always verify clearance for your specific calliper and vehicle combination before mounting tyres.

Key Features

• Cast 1-Piece Construction: Single-piece cast aluminium — ESR’s entry-level construction tier. Adequate strength for street driving and occasional spirited use. Heavier than flow-formed or forged alternatives
• 5-Spoke Design: Clean, versatile spoke pattern suited to OEM+, street, and JDM-influenced builds
• Gloss Black Finish: Deep gloss black — a neutral, versatile finish that complements most vehicle colours
• 18x8.5: 18” diameter, 8.5” width — typically suited to 225–245 section width tyres. Confirm tyre size and clearance for your specific vehicle and suspension setup
• Includes: ESR centre cap and valve stem

Common Compatible Vehicles (5x114.3)

Confirm bolt pattern, offset, hub bore, and brake clearance for your specific year and trim before ordering:

• Nissan 350Z / 370Z / 240SX (S13 / S14)
• Subaru WRX / STI (2015+) / BRZ (2022+)
• Toyota 86 ZN6 / GR86 (2022+)
• Mazda RX-7 FD / RX-8
• Honda Civic (2022+) / Accord
• Infiniti G35 / G37

Sold individually — one wheel per listing. Confirm bolt pattern (5x114.3), offset (+30mm), and hub bore (73.1mm) against your vehicle specification before ordering. Hub centric rings required for most fitments — confirm your hub diameter. Confirm tyre size and brake calliper clearance for your specific setup. Re-torque lug nuts after the first 100–150 km. Professional installation and a wheel alignment are recommended after fitment.

Specifications

• Brand: ESR Wheels
• Model: CR5
• Part Number: 88551430
• Construction: Cast 1-piece aluminium
• Spoke Design: 5-spoke
• Diameter: 18”
• Width: 8.5”
• Bolt Pattern: 5x114.3
• Offset: +30mm
• Hub Bore: 73.1mm
• Finish: Gloss Black
• Includes: Centre cap, valve stem
• Quantity: 1 wheel (sold individually)