{"product_id":"gk-tech-s-r-chassis-z33-z34-transmission-conversion-braided-clutch-line-banjo-to-straight-rhd-z33x-bast","title":"GK Tech S\/R Chassis Z33\/Z34 Transmission Conversion Braided Clutch Line | Banjo to Straight | RHD | Z33X-BAST","description":"\u003ch2\u003eGK Tech S\/R Chassis Z33\/Z34 Transmission Conversion Braided Clutch Line – Banjo to Straight | Z33X-BAST\u003c\/h2\u003e\n\u003cdiv style=\"border: 2px solid #cc0000; padding: 12px; margin-bottom: 16px; background-color: #fff5f5;\"\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ RHD VEHICLES ONLY — This clutch line is designed for right-hand drive vehicles only. Not compatible with LHD applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eGK Tech’s braided clutch line for the Z33\/Z34 transmission conversion in Nissan S and R chassis vehicles. Designed specifically for the swap configuration where a Nissan 350Z (Z33) or 370Z (Z34) gearbox is installed into an S13, S14, S15, R32, R33, R34, or other compatible S\/R chassis — where the factory clutch line no longer reaches or seals correctly due to the different slave cylinder position on the Z33\/Z34 transmission. This is the \u003cstrong\u003eBanjo to Straight fitting variant\u003c\/strong\u003e — M10x1.0 Banjo fitting on the master cylinder end, M10x1.0 straight fitting on the slave cylinder end. Choose this variant based on the outlet location on your specific master cylinder.\u003c\/p\u003e\n\u003ch3\u003eWhy a New Clutch Line Is Required for the Z33\/Z34 Conversion\u003c\/h3\u003e\n\u003cp\u003eThe Z33 (350Z) and Z34 (370Z) transmissions are a popular upgrade in S and R chassis builds — offering stronger internals, better gear ratios, and a closer-ratio spread than the stock SR20 or CA18 gearbox. However, the Z33\/Z34’s slave cylinder is located differently than the factory S\/R chassis transmission, and the factory clutch hydraulic line does not route correctly or reach the slave cylinder without modification. GK Tech’s conversion clutch line runs directly from the master cylinder to the slave cylinder in a single purpose-built line, engineered for the Z33\/Z34 slave cylinder position in the S\/R chassis engine bay. No splicing, adapting, or improvised routing required.\u003c\/p\u003e\n\u003ch3\u003eFitting Configuration — Banjo to Straight (This Listing)\u003c\/h3\u003e\n\u003cp\u003eGK Tech offers this clutch line in two fitting configurations based on the outlet type on your OEM master cylinder:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBanjo to Banjo:\u003c\/strong\u003e M10x1.0 Banjo fitting on both the master cylinder end and the slave cylinder end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBanjo to Straight (This listing — Z33X-BAST):\u003c\/strong\u003e M10x1.0 Banjo fitting on the master cylinder end, M10x1.0 straight fitting on the slave cylinder end\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm the outlet fitting type on your specific master cylinder before ordering. The correct variant is determined by the master cylinder outlet — not the transmission.\u003c\/p\u003e\n\u003ch3\u003eConstruction\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssembled In-House in Australia:\u003c\/strong\u003e GK Tech assembles their braided brake and clutch lines in-house at their Australian facility — not outsourced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel Fittings:\u003c\/strong\u003e M10x1.0 stainless steel fittings on both ends — corrosion resistant and compatible with standard clutch hydraulic fluid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel Braided Line:\u003c\/strong\u003e Stainless steel braid outer sleeve — abrasion resistant and provides consistent line pressure without expansion under load (unlike rubber hydraulic lines, which can expand slightly under pressure, resulting in a soft or spongy clutch pedal feel)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTeflon Inner Tube:\u003c\/strong\u003e PTFE (Teflon) inner tube — chemically compatible with DOT brake\/clutch fluid, smooth inner bore for consistent fluid flow, and resistant to fluid degradation over time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePVC Outer Protection:\u003c\/strong\u003e PVC outer coating over the stainless braid for additional protection against abrasion and chafing in the engine bay\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFor use with OEM master cylinder with M10x1.0 thread and Z33\/Z34 transmission conversion. RHD vehicles only.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Cefiro A31\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R32 GTR \/ GTS-T \/ GTS4\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R33 GTR \/ GTS \/ GTS-T \/ GTS4\u003c\/li\u003e\n\u003cli\u003eNissan Skyline R34 GT-T\u003c\/li\u003e\n\u003cli\u003eNissan 240SX \/ Silvia S13 — KA24 (coupe and hatch) \/ SR20 (hatch and coupe\/Silvia)\u003c\/li\u003e\n\u003cli\u003eNissan 240SX \/ Silvia S14\u003c\/li\u003e\n\u003cli\u003eNissan Silvia S15\u003c\/li\u003e\n\u003cli\u003eNissan 300ZX Z32\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eRHD vehicles only. Fitment is based on use of the OEM master cylinder with M10x1.0 thread. Confirm your master cylinder thread specification and outlet fitting type before ordering. Verify the correct fitting variant (Banjo-to-Banjo or Banjo-to-Straight) based on your master cylinder outlet before purchasing. Bleed the clutch hydraulic system thoroughly after installation. Professional installation recommended.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: GK Tech\u003c\/li\u003e\n\u003cli\u003ePart Number: Z33X-BAST\u003c\/li\u003e\n\u003cli\u003eFitting Configuration: Banjo to Straight (M10x1.0 Banjo — master cylinder \/ M10x1.0 Straight — slave cylinder)\u003c\/li\u003e\n\u003cli\u003eInner Tube: PTFE (Teflon)\u003c\/li\u003e\n\u003cli\u003eOuter Braid: Stainless Steel\u003c\/li\u003e\n\u003cli\u003eOuter Protection: PVC\u003c\/li\u003e\n\u003cli\u003eFittings: Stainless Steel M10x1.0\u003c\/li\u003e\n\u003cli\u003eAssembly: In-house, Australia\u003c\/li\u003e\n\u003cli\u003eApplication: Z33\/Z34 transmission conversion — Nissan S\/R chassis\u003c\/li\u003e\n\u003cli\u003eDrive: RHD only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GK Tech","offers":[{"title":"Default Title","offer_id":51273076539559,"sku":"Z33X-BAST","price":85.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/8344\/1063\/files\/GKTechZ33X-BAST.jpg?v=1787925341","url":"https:\/\/www.straightsiximports.com\/products\/gk-tech-s-r-chassis-z33-z34-transmission-conversion-braided-clutch-line-banjo-to-straight-rhd-z33x-bast","provider":"Straight Six Imports","version":"1.0","type":"link"}