Injector Dynamics ID1050x Yamaha Apex Fuel Injectors, Set of 4 | 1050.48.11.14.4

This Injector Dynamics ID1050x application is catalogued for 2006–2012 Yamaha Apex snowmobiles and supplies four fuel injectors for a coordinated fueling upgrade. The ID1050 platform provides a nominal 1065 cc/min flow rating under the manufacturer's stated test conditions, with injector characterization data available to support proper engine-management calibration. Ships fast across Canada and the US.

Application and Package

• Catalogued application: Yamaha Apex snowmobile, 2006–2012.
• Listed part number: 1050.48.11.14.4.
• Product family: Injector Dynamics ID1050x.
• Package: set of four injectors, not one individual injector.

Technical Reference

• Nominal flow: 1065 cc/min at 3.0 bar differential pressure, using gasoline at 52°C.
• Application reference lists a 48 mm injector height and 11 mm inlet.
• Top-feed, high-impedance injector configuration.
• USCAR electrical connector.

Flow ratings depend on fuel, temperature and differential pressure. Use the correct characterization data for the actual supplied injector revision and ECU rather than entering the nominal flow figure alone. Confirm any connector plugs, pins, adapters and installation hardware supplied with the exact kit before starting.

Ordering Notes

This listing retains the established 1050.48.11.14.4 part number. Catalogues also reference revised ID1050-XDS naming and alternate application-specific numbers. Verify the supplied revision and application with your installer; do not assume that every ID1050-series injector or similarly numbered kit is interchangeable.

No fixed horsepower gain or power capacity is promised. Injector sizing must account for the engine configuration, fuel, operating pressure and intended duty cycle.

Ships fast across Canada and the US.