{"product_id":"konig-forged-f3s-19x12-5-5x120-65-et56-satin-charcoal","title":"Konig Forged F3S | 19x12.5 | 5x120.65 | ET56 | Satin Charcoal | Forged Monoblock | F3S2952056G","description":"\u003ch2\u003eKonig Forged F3S – 19x12.5 | 5x120.65 | ET56 | Satin Charcoal | Forged Monoblock\u003c\/h2\u003e\n\u003cp\u003eThe Konig Forged F3S in 19x12.5 5x120.65 ET56 Satin Charcoal is a wide, high-offset forged monoblock wheel engineered for GM 5x120.65 applications — including the Chevrolet Corvette (C5\/C6\/C7) and Camaro. At 19x12.5 with an ET56 offset, this is a wide rear-fitment wheel designed for staggered setups where a wider rear wheel with a higher offset is required to correctly fill the rear wheel well. Konig's forged monoblock construction delivers a meaningful weight advantage over cast alternatives, with the structural integrity required for high-performance street and track use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ Bolt Pattern Note – 5x120.65 (GM Specific):\u003c\/strong\u003e This wheel uses a \u003cstrong\u003e5x120.65mm bolt pattern\u003c\/strong\u003e — the GM\/Chevrolet-specific bolt circle used on the Corvette C5\/C6\/C7 and select Camaro applications. This is \u003cstrong\u003enot interchangeable with standard 5x120mm\u003c\/strong\u003e (BMW). Verify your vehicle's exact bolt pattern specification before ordering.\u003c\/p\u003e\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 19\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 12.5\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt Pattern:\u003c\/strong\u003e 5x120.65mm (GM\/Chevrolet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset:\u003c\/strong\u003e ET56\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Satin Charcoal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Forged Monoblock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e F3S2952056G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC:\u003c\/strong\u003e 43482230893\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Monoblock Construction – Lightweight \u0026amp; High Strength:\u003c\/strong\u003e Konig Forged F3S is built using a forged monoblock process — a single piece of aluminum alloy forged under high pressure for superior grain structure, strength, and weight reduction compared to cast or flow-formed wheels. Forged construction is the preferred choice for performance and track applications where unsprung weight reduction directly improves handling response\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e19x12.5 ET56 – Wide Rear Fitment:\u003c\/strong\u003e 19\" diameter, 12.5\" width, and ET56 offset is a wide, high-offset fitment specification — the high ET56 offset positions the wheel face deeper into the wheel well, making this a typical rear-fitment wheel for staggered setups on Corvette C5\/C6\/C7 and Camaro platforms where the rear requires a wider wheel tucked correctly under the rear bodywork. Verify fitment carefully against your specific vehicle's rear fender clearance, suspension geometry, and centre bore requirements before ordering\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x120.65 – GM\/Chevrolet Specific Bolt Pattern:\u003c\/strong\u003e 5x120.65mm is the GM-specific bolt circle used on the Chevrolet Corvette C5, C6, and C7, and select Camaro applications. This half-millimetre difference from standard 5x120mm (BMW) is critical — the two patterns are not interchangeable. Always verify your vehicle's exact bolt pattern specification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatin Charcoal Finish – Premium Understated Aesthetic:\u003c\/strong\u003e Satin charcoal finish delivers a premium, low-gloss dark appearance that complements a wide range of vehicle colours — matches the 19x10.5 ET36 F3S front fitment for a consistent staggered set appearance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKonig Forged Quality:\u003c\/strong\u003e Manufactured by Konig — a respected wheel brand with a strong presence in the performance and motorsport aftermarket, known for quality forged wheel construction and competitive pricing in the forged segment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ Fitment Verification Required:\u003c\/strong\u003e 19x12.5 ET56 is a wide, high-offset fitment specification. Verify rear fender clearance, suspension travel, centre bore compatibility, and any camber requirements for your specific vehicle before ordering. This wheel is sold individually — verify whether you need a single wheel or a complete staggered set (pairs with the 19x10.5 ET36 F3S for a front\/rear staggered fitment). Tyre selection for a 12.5\" wide 19\" wheel will significantly affect final fitment — consult a fitment specialist before purchasing tyres.\u003c\/p\u003e","brand":"Konig","offers":[{"title":"Default Title","offer_id":51256516116647,"sku":"KNGF3S2952056G","price":1291.86,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/8344\/1063\/files\/KonigF3S0952036G.jpg?v=1787623059","url":"https:\/\/www.straightsiximports.com\/products\/konig-forged-f3s-19x12-5-5x120-65-et56-satin-charcoal","provider":"Straight Six Imports","version":"1.0","type":"link"}