Konig Hexaform – 18x10.5 | 5x120 | ET33 | Matte Bronze | Cast

The Konig Hexaform in 18x10.5 5x120 ET33 Matte Bronze is a wide-fitment cast wheel engineered for BMW 5x120 applications — including the 3 Series, 5 Series, and M3. At 18x10.5 with an ET33 offset, this is a wide, moderately low-offset fitment suited for aggressive stance builds and staggered rear setups on BMW platforms. The Hexaform's distinctive hexagonal spoke design delivers a bold, motorsport-inspired aesthetic at a more accessible price point than Konig's forged lineup.

⚠️ Bolt Pattern Note – 5x120 (BMW Standard): This wheel uses a 5x120mm bolt pattern — the standard BMW bolt circle used across a wide range of BMW 3 Series, 5 Series, M3, and other BMW models. This is not the same as 5x120.65mm (GM/Chevrolet). Verify your vehicle's exact bolt pattern specification before ordering.

Key Specifications

• Diameter: 18"
• Width: 10.5"
• Bolt Pattern: 5x120mm (BMW)
• Offset: ET33
• Finish: Matte Bronze
• Construction: Cast
• Part Number: HFT08520338
• UPC: 43482228906

Key Features

• Hexagonal Spoke Design – Bold Motorsport Aesthetic: The Hexaform's distinctive hexagonal spoke pattern delivers a bold, motorsport-inspired appearance that stands out from conventional multi-spoke designs — a strong visual statement for BMW builds where wheel design is a priority
• 18x10.5 ET33 – Wide Aggressive Fitment: 18" diameter, 10.5" width, and ET33 offset is a wide, moderately low-offset fitment for BMW 5x120 platforms — suited for aggressive stance builds, staggered rear setups, and builds where maximum tyre contact patch and outward wheel face positioning are the priority. Verify fitment carefully against your specific vehicle's rear fender clearance, suspension geometry, and centre bore requirements before ordering
• 5x120 – BMW Standard Bolt Pattern: 5x120mm is the standard bolt circle used across a wide range of BMW models including the 3 Series (E46, E90, F30, G20), 5 Series, M3, and others. Verify your specific BMW model's bolt pattern, centre bore, and offset requirements before ordering
• Matte Bronze Finish – Distinctive Colour Statement: Matte bronze finish delivers a warm, distinctive appearance that contrasts strongly with dark or light BMW body colours — a popular choice for builds where a unique, eye-catching wheel colour is the priority over a traditional silver, black, or charcoal finish
• Cast Construction – Accessible Performance Styling: Cast construction delivers the Hexaform's bold design at a more accessible price point than Konig's forged lineup — a strong choice for builds where visual impact and fitment are the priority and the weight savings of forged construction are secondary
• Konig Quality: Manufactured by Konig — a respected wheel brand with a strong presence in the performance and motorsport aftermarket, known for quality wheel construction across both cast and forged segments

⚠️ Fitment Verification Required: 18x10.5 ET33 is a wide, aggressive fitment specification. Verify rear fender clearance, suspension travel, centre bore compatibility, and any camber requirements for your specific vehicle before ordering. BMW centre bore is typically 72.6mm — confirm your specific model's centre bore and use hub-centric rings if required. This wheel is sold individually — verify whether you need a single wheel or a set. Consult a fitment specialist before purchasing tyres for a 10.5" wide 18" wheel.