{"product_id":"method-mr703-17x8-5-35mm-offset-5x150-110-5mm-cb-bead-grip-matte-black-wheel","title":"Method MR703 Bead Grip Wheel | 17x8.5 +35mm | 5x150 | 110.5mm CB | Matte Black | Single | MR70378558335","description":"\u003ch2\u003eMethod MR703 Bead Grip Wheel – 17×8.5 | +35mm Offset | 5×150 | 110.5mm CB | Matte Black | MR70378558335\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSold as a single wheel — price is per wheel. Order the quantity needed for your build.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5×150 bolt pattern — fits Toyota Tundra, Land Cruiser 100\/200 series, Sequoia, and Lexus LX470\/LX570. Verify your vehicle’s hub bore against the 110.5mm CB before ordering — hub-centric rings may be required.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMethod MR703 Bead Grip cast aluminium off-road wheel in matte black. 17×8.5, +35mm offset, 5×150 bolt pattern, 110.5mm centre bore. 31.8 lbs per wheel. Ships fast across Canada and the US.\u003c\/p\u003e\n\u003ch3\u003eMethod Bead Grip — Off-Road Bead Retention Without Bead Locks\u003c\/h3\u003e\n\u003cp\u003eMethod’s Bead Grip is a series of machined serrations in the wheel’s bead seat that mechanically grip the tyre bead and resist de-beading when the tyre is aired down for off-road traction. Airing down to 15–20 PSI — standard practice for off-road traction on rock, sand, and loose terrain — reduces sidewall stiffness and creates a larger contact patch, but also risks burping or fully de-beading the tyre under hard lateral loads on a standard smooth bead seat. Bead Grip provides meaningful resistance to tyre de-beading at low pressures without requiring full bead lock rings, which are not street-legal in most jurisdictions. For truck and SUV owners who air down on trails and drive home on the highway, the MR703 Bead Grip is the practical middle ground between a standard wheel and a full bead lock setup.\u003c\/p\u003e\n\u003ch3\u003e17×8.5 — Offset and Tyre Fitment\u003c\/h3\u003e\n\u003cp\u003eThe 17×8.5 size suits 285–315mm width tyres on most 5×150 Toyota and Lexus platforms. The +35mm offset positions the wheel face 35mm outboard of the hub mounting face — a positive, relatively conservative offset that prioritises suspension and brake caliper clearance over outward stance. Buyers seeking a more aggressive poke should verify this offset works with their target tyre size and lift level before ordering. Confirm tyre-to-fender and tyre-to-suspension clearance with your specific lift and tyre combination.\u003c\/p\u003e\n\u003ch3\u003e5×150 Fitment — Toyota Truck and SUV Family\u003c\/h3\u003e\n\u003cp\u003eThe 5×150 bolt pattern is used across Toyota’s large truck and SUV lineup — Tundra (all generations), Land Cruiser 100 and 200 series, Sequoia, and their Lexus equivalents (LX470, LX570). This is one of the most popular bolt patterns in the overland and truck-build community. The 110.5mm centre bore is a close match to Toyota’s factory hub bore — confirm your vehicle’s hub bore diameter and use hub-centric rings if there is a gap between the wheel bore and hub register to eliminate any vibration at speed.\u003c\/p\u003e\n\u003ch3\u003eMatte Black Finish\u003c\/h3\u003e\n\u003cp\u003eThe MR703 in matte black is a clean, understated finish that holds up well in off-road conditions compared to polished or chrome alternatives — surface contamination from mud, dust, and trail debris is less visible and easier to clean on a matte finish.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSold as a single wheel. Verify bolt pattern (5×150), hub bore (110.5mm), offset (+35mm), and tyre clearance before ordering. Hub-centric rings may be required. Torque lug nuts to Toyota specification. Re-torque after first 50 miles. Confirm load rating against your vehicle’s GVWR.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Method Race Wheels\u003c\/li\u003e\n\u003cli\u003eModel: MR703 Bead Grip\u003c\/li\u003e\n\u003cli\u003ePart Number: MR70378558335\u003c\/li\u003e\n\u003cli\u003eSize: 17×8.5\u003c\/li\u003e\n\u003cli\u003eOffset: +35mm\u003c\/li\u003e\n\u003cli\u003eBolt Pattern: 5×150\u003c\/li\u003e\n\u003cli\u003eCentre Bore: 110.5mm\u003c\/li\u003e\n\u003cli\u003eFinish: Matte Black\u003c\/li\u003e\n\u003cli\u003eConstruction: Cast aluminium\u003c\/li\u003e\n\u003cli\u003eWeight: 31.8 lbs (per wheel)\u003c\/li\u003e\n\u003cli\u003eQuantity: Single wheel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Method Wheels","offers":[{"title":"Default Title","offer_id":51325995581607,"sku":"MRWMR70378558335","price":512.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/8344\/1063\/files\/174de206fe84012b1605b1810739718fL.png?v=1789065427","url":"https:\/\/www.straightsiximports.com\/products\/method-mr703-17x8-5-35mm-offset-5x150-110-5mm-cb-bead-grip-matte-black-wheel","provider":"Straight Six Imports","version":"1.0","type":"link"}