Seibon MG-Style Carbon Fibre Hood – 2000–2010 Honda S2000 (AP1/AP2) | Vented Design | OEM Replacement | Gloss Finish

The Seibon MG-Style Carbon Fibre Hood for the 2000–2010 Honda S2000 (AP1/AP2) is a direct-fit OEM-replacement carbon fibre hood featuring Seibon's MG-style vented design — a more aggressive, motorsport-inspired hood profile that transforms the S2000's front end appearance while replacing the factory steel hood with a hand-crafted carbon fibre unit that delivers significant front-end weight reduction. The Honda S2000 (AP1/AP2) is one of the most celebrated front-engine, rear-wheel-drive sports cars ever produced — a high-revving, driver-focused roadster with a dedicated enthusiast community where weight reduction and exterior modifications are a core part of the ownership experience. Seibon's MG-style carbon fibre hood is one of the most visually impactful single exterior modifications available for the S2000 — combining the aggressive vented hood profile with the premium look of exposed carbon fibre weave and the performance benefit of front-end weight reduction. Seibon carbon fibre components are hand-crafted using a consistent weave pattern, exceptional carbon/resin ratio for high stiffness and strength, and a glossy clear coat finish that does not chip or flake. Every component is meticulously inspected before leaving Seibon's production facility.

Key Features:

• MG-style vented design — Seibon's MG-style hood features a vented profile — a more aggressive, motorsport-inspired hood design that transforms the S2000's front end appearance compared to the factory hood
• Carbon fibre construction — hand-crafted carbon fibre replaces the factory steel hood — significant weight reduction at the front of the S2000 for improved front-end weight distribution and reduced unsprung mass
• OEM replacement fitment — direct replacement for the factory AP1/AP2 S2000 hood using the factory hinge and latch mounting points — no modification required for installation
• Consistent weave pattern — Seibon's production process ensures a consistent, uniform carbon fibre weave pattern across the entire hood surface
• Exceptional carbon/resin ratio — high carbon/resin ratio creates high product stiffness and extra strength without unnecessary resin weight
• Glossy clear coat finish — coated with a glossy clear coat that does not chip or flake — protecting the carbon fibre weave and maintaining the hood's appearance over time
• Seibon quality — over 20 years of carbon fibre production experience — every component meticulously inspected before shipping

MG-Style — The Hood Design:

Seibon's MG-style hood features a vented profile that gives the S2000's front end a more aggressive, motorsport-influenced appearance. The vented design references the functional hood designs used on purpose-built track and competition vehicles — a profile that suits the S2000's high-revving, driver-focused character and complements the car's sporting proportions. Combined with the carbon fibre weave and gloss finish, the MG-style hood is one of the most visually impactful single exterior modifications available for the AP1/AP2 S2000.

Weight Reduction — S2000 Context:

The Honda S2000's F20C and F22C engines are front-mounted in a front-mid engine layout — the S2000 carries a meaningful proportion of its weight over the front axle. A carbon fibre hood replacement is one of the most effective single weight reduction modifications available for the S2000 — removing significant mass from the front of the car where it has the greatest effect on weight distribution and front-end agility. For S2000 owners building a track-focused or weight-reduction-focused car, the Seibon MG-style carbon fibre hood is a meaningful and visually impactful weight reduction upgrade.

AP1 vs. AP2 — Fitment Note:

The Honda S2000 was produced in two generations — the AP1 (2000–2003, F20C engine) and the AP2 (2004–2009, F22C engine, revised front end). The Seibon MG-style hood (SEIHD0005HDS2K-MG) covers both the AP1 and AP2 generations — verify your specific S2000 model year before ordering to confirm correct fitment.

Specifications:

• Brand: Seibon
• Part Number: SEIHD0005HDS2K-MG
• Barcode: HD0005HDS2K-MG
• Style: MG — vented
• Material: Carbon fibre
• Finish: Glossy clear coat
• Type: OEM replacement hood
• Application: 2000–2010 Honda S2000 — AP1 / AP2
• Weight: 35 lbs (shipping weight)

Fitment Information:

• 2000–2003 Honda S2000 — AP1 — F20C 2.0L
• 2004–2009 Honda S2000 — AP2 — F22C 2.2L
• Direct OEM replacement — uses factory hinge and latch mounting points — no modification required
• Note: Verify your specific S2000 model year (AP1 vs. AP2) before ordering — confirm that SEIHD0005HDS2K-MG is the correct hood for your specific S2000 generation. Professional installation by an experienced body shop strongly recommended — hood replacement requires correct hinge alignment, correct gap adjustment at the fenders and front bumper, and correct latch adjustment for safe hood operation at speed.

What's Included:

• Seibon MG-style carbon fibre hood — gloss finish — 2000–2010 Honda S2000 AP1/AP2 (SEIHD0005HDS2K-MG)
• Refer to Seibon's product documentation for complete hardware contents

Installation Notes:

• Professional installation by an experienced body shop strongly recommended — hood replacement requires correct hinge alignment, correct gap adjustment at the fenders and front bumper, and correct latch adjustment for safe hood operation at speed
• Verify correct hood latch engagement before driving — a hood that is not correctly latched is a serious safety hazard at speed. Verify that the primary latch and safety catch both engage correctly before the first drive.
• Carbon fibre requires UV protection — apply a quality UV-resistant clear coat or carbon fibre sealant to protect the carbon fibre weave from UV degradation. Unprotected carbon fibre will yellow and degrade over time with UV exposure.
• Do not use abrasive polishes or compounds on the carbon fibre surface — use only carbon fibre-safe detailing products
• Inspect the hood for shipping damage before installation — document any damage before accepting delivery and contact Straight Six Imports immediately if damage is found
• Hood prop rod or aftermarket hood struts may be required — verify compatibility with the factory S2000 hood prop system before installation

Why Seibon?

Seibon is one of the most respected carbon fibre body panel brands in the performance aftermarket — with over 20 years of carbon fibre production experience and a product lineup that covers a wide range of performance, JDM, and enthusiast platforms. Seibon's hand-crafted carbon fibre components are produced with a consistent weave pattern, exceptional carbon/resin ratio, and a glossy clear coat finish — and every component is meticulously inspected before shipping. For S2000 owners who want a quality MG-style vented carbon fibre hood from a brand with proven carbon fibre body panel credentials, Seibon is the correct choice.

Perfect For:

• 2000–2010 Honda S2000 (AP1/AP2) owners who want an MG-style vented carbon fibre hood for a more aggressive, motorsport-inspired front end appearance and front-end weight reduction
• S2000 track and performance builds where the MG-style vented profile and carbon fibre construction complement the car's high-revving, driver-focused character and the build's overall performance and aesthetic direction
• Owners who want Seibon's proven carbon fibre quality and OEM-replacement fitment for a clean, professional installation result on their AP1 or AP2 S2000

Note: Fits 2000–2010 Honda S2000 AP1/AP2 — verify model year before ordering. Professional body shop installation strongly recommended. Verify hood latch engagement before driving — safety critical. Apply UV protection to carbon fibre surface. Inspect for shipping damage before installation.