Tein Supra A70 Flex Z Coilovers | VST38-C1SA3-C
Tein Supra A70 Flex Z Coilovers | VST38-C1SA3-C
Set up your compatible Toyota Supra A70 with Tein Flex Z coilovers, combining full-length ride-height adjustment with 16-level damping adjustment. Tune the stance and damping to suit your setup without relying on a fixed, one-size-fits-all suspension setting. Ships fast across Canada and the US.
Specifications
- Brand: Tein.
- Series: Flex Z.
- Manufacturer part number: VST38-C1SA3-C
- Damper construction: twin-tube.
- Damping adjustment: 16 levels.
- Full-length ride-height adjustment.
- Front spring rate: 14.0 kgf/mm.
- Rear spring rate: 6.0 kgf/mm.
- Reinforced rubber upper mounts, front and rear.
- Kit configuration: four dampers and four springs.
Supra Fitment
Listed for compatible A70-generation Supra applications. The published VST38-C1SA3-C application table identifies MA70L models for 1987–1992, alongside market-specific MA70, GA70 and JZA70 applications. The original 1986–1992 listing range is not a guarantee for every chassis or market: confirm the chassis code and suspension configuration before ordering. This is not an A80/JZA80 or A90 kit.
MA70L Ride-Height Reference
The published VST38-C1SA3 application data for the MA70L provides the following reference figures. Confirm that these settings apply to the supplied VST38-C1SA3-C kit before installation; separate suffix-specific settings have not been independently verified.
- Base lowering relative to factory height: front 45mm (approximately 1.8 inches), rear 40mm (approximately 1.6 inches).
- Recommended front range relative to factory height: −55 to −35mm.
- Recommended rear range relative to factory height: −50 to −30mm.
These are application reference values, not guaranteed results on every vehicle. Negative values indicate lowering from factory height. Maximum mechanical adjustment limits are not recommended driving settings; final setup must retain suitable travel and clearance.
Adjustment and Installation
Full-length adjustment allows ride height to be set separately from the spring-seat adjustment. Use the application-specific recommended settings rather than treating the maximum mechanical adjustment range as a recommended driving height. Damping adjustment does not change the spring rate, and lowering can affect clearance, alignment and suspension travel.
Ships fast across Canada and the US.