{"product_id":"torque-solution-billet-aluminum-transmission-mount-infiniti-q50-q60-3-0t-rwd","title":"Torque Solution Billet Aluminium Transmission Mount | Infiniti Q50 \/ Q60 3.0t RWD | TS-TM-692","description":"\u003ch2\u003eTorque Solution Billet Aluminium Transmission Mount – Infiniti Q50 \/ Q60 3.0t RWD | TS-TM-692\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eFits Infiniti Q50 3.0t RWD and Q60 3.0t RWD with VR30DDTT engine. RWD models only — does not fit AWD variants. Confirm your drivetrain configuration before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTorque Solution TS-TM-692 billet aluminium transmission mount for the Infiniti Q50 and Q60 3.0t RWD. Replaces the OEM rubber transmission mount with a precision-machined billet aluminium bracket and polyurethane bushing to reduce drivetrain movement under acceleration and deceleration, improving throttle response, shift feel, and launch consistency. Ships fast across Canada and the US.\u003c\/p\u003e\n\n\u003ch3\u003eWhat the Transmission Mount Does\u003c\/h3\u003e\n\u003cp\u003eThe transmission mount supports the rear of the transmission and controls fore-aft and lateral movement of the drivetrain under load. The OEM rubber mount uses a soft bushing that allows significant drivetrain movement — felt as a lurch or hesitation at throttle application, vague shift feel, and reduced consistency under repeated hard acceleration. Torque Solution’s billet aluminium bracket and polyurethane bushing dramatically reduces this movement without fully eliminating compliance. The result is a more direct, responsive drivetrain feel under all throttle conditions — one of the highest-value drivetrain improvements available for the Q50 and Q60 3.0t platform relative to cost and installation effort.\u003c\/p\u003e\n\n\u003ch3\u003eBillet Aluminium Bracket\u003c\/h3\u003e\n\u003cp\u003eThe TS-TM-692 bracket is CNC-machined from billet aluminium for precision fitment and structural rigidity under the sustained drivetrain loads that flex and fatigue OEM stamped steel brackets over time, particularly on modified or high-power VR30DDTT applications. Billet construction ensures consistent geometry at the mount interface and eliminates the stamping tolerances of OEM hardware.\u003c\/p\u003e\n\n\u003ch3\u003ePolyurethane Bushing — NVH Tradeoff\u003c\/h3\u003e\n\u003cp\u003eThe mount bushing is polyurethane, which is significantly firmer than the OEM rubber unit. The stiffer bushing reduces drivetrain movement more effectively but will transmit more vibration and noise into the cabin compared to OEM rubber — this is normal and expected for this type of drivetrain upgrade. On a street-driven Q50 or Q60, the NVH increase is noticeable but generally acceptable, particularly in Sport or Manual shift mode where powertrain feedback is already more pronounced. On a track or performance-focused build, it is a non-issue.\u003c\/p\u003e\n\n\u003ch3\u003eRWD Fitment — VR30DDTT\u003c\/h3\u003e\n\u003cp\u003eThe TS-TM-692 fits the Infiniti Q50 3.0t RWD (2016 and later) and Q60 3.0t RWD (2017 and later) with the VR30DDTT twin-turbocharged V6 engine. \u003cstrong\u003eThis mount is for RWD-configured vehicles only\u003c\/strong\u003e — the AWD Q50 and Q60 use a different drivetrain layout and transmission mount geometry. Confirm your vehicle’s drivetrain (RWD vs AWD) before ordering. Both 300hp and 400hp VR30DDTT variants are covered — confirm with Torque Solution’s fitment guide if unsure.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eFirmer bushing than OEM — increased NVH (noise, vibration, harshness) is normal and expected. RWD models only — does not fit AWD Q50\/Q60. Confirm drivetrain and model year before ordering. Professional installation recommended.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Torque Solution\u003c\/li\u003e\n\u003cli\u003ePart Number: TS-TM-692\u003c\/li\u003e\n\u003cli\u003eType: Transmission mount\u003c\/li\u003e\n\u003cli\u003eBracket Material: Billet aluminium\u003c\/li\u003e\n\u003cli\u003eBushing Material: Polyurethane\u003c\/li\u003e\n\u003cli\u003eApplication: Infiniti Q50 3.0t RWD (2016+) \/ Q60 3.0t RWD (2017+) — VR30DDTT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":51342020378791,"sku":"TQSTS-TM-692","price":357.76,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/8344\/1063\/files\/81071924152b68f5fb76f57cc231c446.jpg?v=1789477299","url":"https:\/\/www.straightsiximports.com\/products\/torque-solution-billet-aluminum-transmission-mount-infiniti-q50-q60-3-0t-rwd","provider":"Straight Six Imports","version":"1.0","type":"link"}