{"product_id":"turbosmart-v-band-0-96ar-oil-cooled-ts-1-7675c-mirror-twin-turbo-package","title":"Turbosmart TS-1 Mirror Twin Turbo Package | TS-1-7675C | V-Band | 0.96 A\/R | Oil Cooled | TS-1-7675C-VB096E-MT","description":"\u003ch2\u003eTurbosmart TS-1 Mirror Twin Turbo Package – TS-1-7675C | V-Band | 0.96 A\/R | Oil Cooled | TS-1-7675C-VB096E-MT\u003c\/h2\u003e\n\u003cdiv style=\"border: 2px solid #e6a817; padding: 12px; margin-bottom: 16px; background-color: #fffbf0;\"\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️ UNIVERSAL APPLICATION — This is a universal twin turbo package, not a vehicle-specific kit. Manifold, intercooler, piping, wastegates, and all supporting hardware are not included. V-band connections on both compressor and turbine housings. Oil-cooled only — no water cooling ports. Confirm turbo sizing, A\/R, and housing orientation against your build requirements before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eTurbosmart TS-1-7675C mirror twin turbo package — two matched TS-1-7675C turbochargers supplied as a left-hand and right-hand mirror pair. V-band inlet and outlet on both turbos. 0.96 A\/R turbine housing. Oil-cooled centre section. Ball-bearing cartridge with billet compressor wheel. 60 lbs for the pair.\u003c\/p\u003e\n\u003ch3\u003eTurbosmart TS-1 Series\u003c\/h3\u003e\n\u003cp\u003eThe Turbosmart TS-1 is Turbosmart’s own-brand ball-bearing turbocharger line, designed for high-performance and motorsport applications. TS-1 turbos use a ball-bearing centre cartridge (CHRA) rather than a journal bearing — ball bearings provide faster spool response, improved shaft stability at high RPM, and longer service life under sustained high-load operation. The billet compressor wheel is CNC-machined from a solid aluminium billet, providing tighter dimensional tolerances, better aerodynamic consistency, and higher burst strength than a cast equivalent.\u003c\/p\u003e\n\u003ch3\u003eTS-1-7675C — Turbo Specification\u003c\/h3\u003e\n\u003cp\u003eThe 7675 designation references the compressor and turbine wheel sizing — a large-frame turbocharger configuration suited for high-power single or twin applications. In a mirror twin configuration at 0.96 A\/R, this package is oriented toward peak power at high RPM rather than low-RPM response. Spool characteristics will depend on engine displacement, exhaust manifold design, and boost target — buyers should map this turbo’s compressor map against their engine’s airflow requirements and power target before committing to this sizing.\u003c\/p\u003e\n\u003ch3\u003eMirror Twin Configuration\u003c\/h3\u003e\n\u003cp\u003eThe mirror twin package provides two TS-1-7675C turbos — one left-hand and one right-hand unit. Mirror twins share identical internal components but have opposite compressor housing outlet orientations, allowing both turbos to be plumbed symmetrically on a twin-turbo manifold without requiring one turbo to use awkward piping angles. This is the correct configuration for parallel or V-engine twin-turbo setups where symmetric layout and equal flow paths are required for balanced power delivery from both banks.\u003c\/p\u003e\n\u003ch3\u003eV-Band Connections\u003c\/h3\u003e\n\u003cp\u003eBoth the compressor inlet and turbine outlet use V-band (Vee-band) clamp connections. V-band is the preferred connection standard for high-performance turbo applications — the clamp provides a strong, leak-resistant seal, is faster to assemble and disassemble than flanged connections, and handles thermal expansion cycles well. V-band connections on both sides simplify intercooler piping and exhaust manifold collector connections.\u003c\/p\u003e\n\u003ch3\u003e0.96 A\/R Turbine Housing\u003c\/h3\u003e\n\u003cp\u003eA\/R (Area\/Radius) is the key parameter describing turbine housing flow capacity. 0.96 A\/R is a large turbine housing for this turbo frame — it offers lower restriction at peak exhaust flow, supporting higher peak power output at elevated RPM. The trade-off is a higher exhaust backpressure threshold required to spool the turbine — spool will occur at higher RPM and higher exhaust flow compared to a smaller A\/R housing. This A\/R is appropriate for high-RPM, high-power builds where top-end output is prioritised over low-RPM response.\u003c\/p\u003e\n\u003ch3\u003eOil Cooled\u003c\/h3\u003e\n\u003cp\u003eThe TS-1-7675C uses an oil-cooled centre section — engine oil circulates through the CHRA for lubrication and heat removal. Water cooling ports are not present. For sustained high-load or high-temperature applications, ensure adequate oil supply pressure and flow to the turbos, and consider a turbo timer or idle-down period after hard use to prevent oil coking in the centre section after shutdown.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUniversal application — manifold, piping, intercooler, wastegates, and supporting hardware not included. Verify compressor map against engine airflow requirements and power target before ordering. V-band clamps and oil feed\/return fittings may be sold separately — confirm included hardware with your order. Oil-cooled only — no water cooling. Professional installation by a qualified turbo\/engine builder required. Proper oil supply and return lines must be configured before startup.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Turbosmart\u003c\/li\u003e\n\u003cli\u003ePart Number: TS-1-7675C-VB096E-MT\u003c\/li\u003e\n\u003cli\u003eSeries: TS-1\u003c\/li\u003e\n\u003cli\u003eConfiguration: Mirror twin (left-hand + right-hand pair)\u003c\/li\u003e\n\u003cli\u003eTurbo Model: TS-1-7675C\u003c\/li\u003e\n\u003cli\u003eCompressor \/ Turbine: Billet wheel \/ turbine wheel\u003c\/li\u003e\n\u003cli\u003eBearing Type: Ball bearing\u003c\/li\u003e\n\u003cli\u003eTurbine Housing A\/R: 0.96\u003c\/li\u003e\n\u003cli\u003eCompressor Inlet: V-band\u003c\/li\u003e\n\u003cli\u003eTurbine Outlet: V-band\u003c\/li\u003e\n\u003cli\u003eCooling: Oil cooled (no water cooling)\u003c\/li\u003e\n\u003cli\u003eQuantity: 2 (matched mirror pair)\u003c\/li\u003e\n\u003cli\u003eWeight: 60 lbs (pair)\u003c\/li\u003e\n\u003cli\u003eApplication: Universal — custom twin-turbo builds\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":51299894427815,"sku":"TURTS-1-7675C-VB096E-MT","price":8346.23,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0555\/8344\/1063\/files\/a31fb1f1cb025fad21f7f9300568649cL.jpg?v=1788523659","url":"https:\/\/www.straightsiximports.com\/products\/turbosmart-v-band-0-96ar-oil-cooled-ts-1-7675c-mirror-twin-turbo-package","provider":"Straight Six Imports","version":"1.0","type":"link"}