Enkei NVR5 Wheel – 18x9.5 | 5x100 | ET45 | 75mm Bore | Dark Hyper Silver | 562-895-8045DHS

Enkei NVR5 cast aluminium wheel in Dark Hyper Silver. 18x9.5 in size, 5x100 bolt pattern, ET45 offset, 75mm centre bore. Sold as a single wheel — order 4 for a complete set. 24.8 lbs per wheel.

Hub-centric rings are required for most vehicles — the 75mm centre bore is larger than most 5x100 hub diameters (Subaru 56.1mm, VW/Audi 57.1mm, Toyota/Scion 60.1mm). Hub rings must be used to centre the wheel on the hub and prevent vibration. Sold separately.

Enkei NVR5

The Enkei NVR5 is a cast aluminium wheel from Enkei’s performance lineup. Enkei is a Japanese manufacturer producing both OEM and aftermarket wheels; their cast performance wheels use Enkei’s MAT (Most Advanced Technology) casting process — a high-pressure casting method that produces a denser, stronger aluminium structure compared to standard gravity casting, allowing the wheel to be cast thinner and lighter without sacrificing structural integrity.

Fitment Parameters

All four fitment parameters must match your vehicle before ordering:

• Diameter / Width: 18x9.5 — 18-inch diameter, 9.5-inch width. A wide fitment — verify fender clearance (inner and outer), suspension component clearance on the inner barrel, and brake caliper clearance with the inner barrel before ordering. A wheel spacer or different offset may be needed depending on the vehicle and caliper combination
• Bolt Pattern: 5x100 — 5-bolt, 100mm pitch circle diameter. Common applications include pre-2005 Subaru Impreza/WRX, Subaru BRZ (ZC6), Scion FR-S/Toyota 86 (ZN6), VW Golf Mk4, VW/Audi TT Mk1, and Scion tC. Confirm your vehicle’s exact bolt pattern before ordering
• Offset: ET45 — 45mm positive offset. The wheel mounting face sits 45mm toward the outside from the wheel centreline. Higher positive offset tucks the wheel further under the fender; lower offset pushes it outward. At 9.5" width and ET45, verify clearance against your specific vehicle and suspension setup — offset requirements vary with ride height and suspension geometry
• Centre Bore: 75mm — 75mm is larger than most 5x100 hub diameters. Hub-centric rings are required to fill the gap between the wheel bore and the hub. Without hub rings, the wheel is lug-centric and wheel vibration at speed is common. Hub rings for the correct bore combination (75mm OD to your hub’s OD) are available separately

Dark Hyper Silver Finish

Dark Hyper Silver is a darker metallic silver finish — deeper in tone than standard Hyper Silver, with a machined or polished face element typical of Enkei’s hyper silver variants. Works well with darker vehicle colours and behind open-spoke designs.

Single Wheel

Sold as one wheel. Order 4 for a complete set. Confirm tyre size compatibility with 18x9.5 before ordering tyres — a 245 or 255 series tyre width is typical for a 9.5" rim width.

Single wheel — order 4 for a full set. Hub-centric rings required for most 5x100 applications — sold separately. Verify all fitment parameters (diameter, width, bolt pattern, offset, bore) against your specific vehicle before ordering. Professional installation recommended. Torque wheel fasteners to vehicle manufacturer’s specification. Re-torque after first 50–100 km.

Specifications

• Brand: Enkei
• Model: NVR5
• Part Number: 562-895-8045DHS
• Construction: Cast aluminium (MAT process)
• Size: 18x9.5
• Bolt Pattern: 5x100
• Offset: ET45
• Centre Bore: 75mm
• Finish: Dark Hyper Silver
• Weight: 24.8 lbs per wheel
• Quantity: Single wheel