Enkei Quest Wheel – 19x9.5 | 5x114.3 | +35mm Offset | 72.6mm Bore | Gunmetal | 556-995-6535GM

Enkei Quest cast aluminium wheel in gunmetal — 19x9.5, 5x114.3 bolt pattern, +35mm offset, 72.6mm hub bore. A multi-spoke street wheel suited to OEM+ and JDM-influenced builds on 5x114.3 platforms. The 5x114.3 bolt pattern covers the widest range of Japanese and Korean performance vehicles — Honda, Acura, Mazda, Nissan, Toyota, Hyundai, Kia, and Subaru (select models). Confirm hub bore and offset suitability for your specific vehicle before ordering.

Fitment — What to Confirm Before Ordering

Three dimensions must be confirmed for correct wheel fitment:

• Bolt Pattern — 5x114.3: Five lug bolts on a 114.3mm (4.5”) pitch circle diameter. Confirm your vehicle uses 5x114.3 — do not assume based on make alone, as some models within the same brand use different bolt patterns depending on year and trim
• Offset — +35mm: The distance from the wheel’s centreline to the hub mounting face. +35mm is a moderate positive offset — the mounting face is 35mm outboard of the wheel centreline. Higher positive offset pushes the wheel inward (toward the vehicle); lower or negative offset pushes the wheel outward. Confirm that +35mm offset provides adequate clearance for your brake callipers and suspension components, and does not cause the tyre to contact the inner guard or outer lip. A wheel spacer can reduce effective offset if additional track width is desired
• Hub Bore — 72.6mm: The centre bore of the wheel. Must be equal to or larger than your vehicle’s hub diameter — if larger, hub centric rings are required to centre the wheel on the hub and prevent vibration. Most 5x114.3 vehicles have a hub diameter smaller than 72.6mm — hub centric rings will be required for most fitments. Common 5x114.3 hub diameters: Honda/Acura 64.1mm, Mazda 67.1mm, Nissan 66.1mm, Toyota 60.1mm, Hyundai/Kia 67.1mm. Confirm your specific vehicle’s hub diameter and source appropriate hub centric rings if needed

Key Features

• Enkei Quest Design: Multi-spoke cast aluminium wheel — a versatile street design suited to OEM+, stance, and JDM-influenced builds. Available in multiple finishes (gunmetal, this listing)
• Cast Aluminium Construction: Cast aluminium — Enkei’s entry-level wheel construction. Heavier than flow-formed or forged alternatives but well-suited to street use where maximum weight reduction is not the priority
• Gunmetal Finish: Dark metallic grey — one of the most versatile finishes for street builds, complementing both dark and light vehicle colours
• 19x9.5: 19” diameter, 9.5” width — an aggressive fitment requiring a wide tyre (typically 245/35 or 255/35 on a 9.5” rim). Confirm tyre clearance for your specific vehicle and suspension setup before ordering
• Enkei: Enkei is a well-established Japanese wheel manufacturer with a strong presence in OEM supply and the aftermarket — their quality control and manufacturing standards are consistent across the range

Common Compatible Vehicles (5x114.3)

The 5x114.3 bolt pattern covers a wide range of vehicles. This is not an exhaustive list — confirm your specific year, model, and trim against bolt pattern, hub bore, and offset specifications before ordering:

• Honda Accord, Civic (select years), CR-V
• Acura TL, TSX, TLX, MDX
• Mazda 3, Mazda 6, CX-5
• Nissan 370Z, 350Z, Altima, Maxima, Sentra, Murano
• Toyota Camry, Corolla, RAV4 (select years)
• Hyundai Elantra N, Sonata, Tucson, Santa Fe
• Kia Stinger, K5, Sportage, Sorento
• Subaru BRZ (2022+) / Toyota GR86 (2022+)

Sold individually — one wheel per listing. A complete set of four requires four units. Confirm bolt pattern (5x114.3), offset (+35mm), and hub bore (72.6mm) against your vehicle specification before ordering. Hub centric rings are required for most fitments — confirm your vehicle’s hub diameter and source appropriate rings. Confirm tyre size and clearance for 19x9.5 with your specific vehicle and suspension setup. A professional wheel and tyre fitment check is recommended before installation.

Specifications

• Brand: Enkei
• Model: Quest
• Part Number: 556-995-6535GM
• Construction: Cast aluminium
• Diameter: 19”
• Width: 9.5”
• Bolt Pattern: 5x114.3
• Offset: +35mm
• Hub Bore: 72.6mm
• Finish: Gunmetal
• Quantity: 1 wheel (sold individually)
• Weight: 25 lbs