Gram Lights 57CR Limited 18x9.5 | 5x114.3 Bolt Pattern | +12 Offset | Black Metal Coat Finish | RAYS Forged | Deep Concave 5-Spoke

The Gram Lights 57CR Limited in 18x9.5 with 5x114.3 bolt pattern, +12 offset, and Black Metal Coat finish is a RAYS-forged deep concave 5-spoke wheel in one of the most aggressive low-offset fitment specifications available in the 57CR lineup — engineered for wide-body, aggressive stance, and performance builds on 5x114.3 platforms where maximum wheel face exposure and a deep concave dish are the priority. The "Limited" designation marks this as a special edition variant of the iconic 57CR design. The +12 offset on a 9.5" wide wheel positions the wheel face extremely close to the outer fender lip — a fitment specification that demands careful clearance verification but delivers the most aggressive, flush wheel stance available in this size. Black Metal Coat is RAYS' dark metallic finish — a deep, dark grey metallic that suits a wide range of vehicle colours and build aesthetics. Gram Lights is RAYS Engineering's performance wheel sub-brand — RAYS is the most respected Japanese forged wheel manufacturer in the world, with decades of motorsport heritage across Super GT, Formula Drift, and global circuit racing.

Key Features:

• 57CR Limited design — Gram Lights' iconic 57CR deep concave 5-spoke wheel in the Limited special edition variant — one of the most recognized and sought-after JDM wheel designs in the performance and stance community
• RAYS forged construction — manufactured by RAYS Engineering using their forging process — forged aluminium provides superior strength-to-weight ratio compared to cast wheels, allowing thinner spokes and a lighter wheel without sacrificing structural integrity
• Deep concave face — the 57CR's defining characteristic — a pronounced deep concave dish that is maximized on the 18x9.5 wide body — the concave face creates a premium, motorsport-inspired wheel appearance
• 18x9.5 sizing — 18" diameter, 9.5" width — a wide, aggressive fitment that maximizes the 57CR's deep concave appearance and provides a wide contact patch for performance tyre fitments
• 5x114.3 bolt pattern — the most common JDM and performance bolt pattern — correct for a wide range of Japanese performance platforms including Nissan, Toyota, Honda, Subaru, and Mitsubishi applications
• +12 offset — extremely low positive offset — positions the wheel face very close to the outer fender lip for a flush, aggressive stance — verify correct fitment with your specific vehicle's suspension geometry, brake caliper clearance, and fender clearance before ordering
• Black Metal Coat finish — RAYS' Black Metal Coat — a deep, dark grey metallic finish that provides a premium, understated appearance that suits a wide range of vehicle colours and build directions
• RAYS / Gram Lights quality — manufactured by RAYS Engineering, the most respected Japanese forged wheel manufacturer in the world

+12 Offset — Fitment Context:

A +12 offset on a 9.5" wide wheel is an extremely aggressive, low-offset specification. The low offset pushes the wheel face outward toward the fender lip, creating a flush or near-flush stance that is highly sought after in the JDM performance and stance community. However, this aggressive offset requires careful fitment verification:

• Fender clearance: The outer edge of the tyre will sit very close to or flush with the fender lip — verify that your specific vehicle's fender geometry provides adequate clearance, particularly at full suspension compression and full steering lock. Fender rolling or pulling may be required.
• Suspension clearance: The inner edge of the wheel will sit further inboard than a higher-offset wheel — verify adequate clearance between the inner barrel and the suspension components (strut, control arm, spring) at full compression.
• Brake caliper clearance: Verify adequate clearance between the wheel spokes and the brake caliper at all wheel positions.

A professional wheel fitment specialist should verify correct fitment before installation on your specific vehicle.

Specifications:

• Brand: Gram Lights (RAYS Engineering)
• Part Number: GLSWGCRX12ERB
• Barcode: 58528951295RB
• Model: 57CR Limited
• Construction: RAYS forged
• Spoke Count: 5-spoke
• Diameter: 18"
• Width: 9.5"
• Bolt Pattern: 5x114.3
• Offset: +12mm
• Finish: Black Metal Coat
• Weight: 28 lbs (shipping weight)

Fitment Information:

• 5x114.3 bolt pattern — correct for a wide range of Nissan, Toyota, Honda, Subaru, Mitsubishi, and other JDM performance platforms
• Verify your specific vehicle's hub bore diameter — hub-centric rings may be required if your vehicle's hub diameter differs from the wheel's bore
• Note: The +12 offset is an extremely aggressive specification — verify correct fender clearance, suspension clearance, and brake caliper clearance for your specific vehicle before ordering. Fender rolling or pulling may be required. A professional wheel fitment specialist should verify correct fitment before installation. This listing is for a single wheel.

What's Included:

• 1x Gram Lights 57CR Limited 18x9.5 +12 5x114.3 Black Metal Coat wheel (GLSWGCRX12ERB)
• Centre cap — refer to RAYS/Gram Lights product documentation for included hardware

Installation Notes:

• Professional installation by an experienced wheel and tyre specialist strongly recommended
• Verify correct torque specification for your vehicle's wheel fasteners — use a calibrated torque wrench — do not use an impact gun to final-torque wheel fasteners
• Re-torque wheel fasteners after the first 50–100km of driving following installation
• Verify fender clearance at full suspension compression and full steering lock before driving — the +12 offset may require fender rolling or pulling on some vehicles
• Hub-centric rings may be required — verify your vehicle's hub diameter and use the correct hub-centric ring if needed
• A four-wheel alignment is recommended after wheel and tyre changes

Why Gram Lights / RAYS?

Gram Lights is RAYS Engineering's performance wheel sub-brand — RAYS is the most respected Japanese forged wheel manufacturer in the world, with decades of motorsport heritage across Super GT, Formula Drift, WTCC, and global circuit racing. RAYS' forging technology and quality control are the benchmark for Japanese performance wheels — every RAYS wheel is manufactured in Japan to exacting quality standards. The 57CR is one of Gram Lights' most iconic and enduring designs — a deep concave 5-spoke wheel that has defined the JDM performance wheel aesthetic for over a decade. For 5x114.3 platform owners who want the most iconic JDM forged wheel design in an aggressive +12 low-offset fitment with RAYS' Black Metal Coat finish, GLSWGCRX12ERB is the correct choice.

Perfect For:

• 5x114.3 platform owners building wide-body, aggressive stance, or performance builds who want the Gram Lights 57CR Limited's iconic deep concave 5-spoke design in an aggressive 18x9.5 +12 fitment with RAYS' Black Metal Coat dark metallic finish
• JDM performance and stance builds where the 57CR Limited's deep concave face, RAYS forged construction, and Black Metal Coat finish deliver the most premium, motorsport-inspired wheel appearance available in this fitment specification
• Owners who want RAYS Engineering's proven forged wheel quality in the iconic 57CR Limited design — manufactured in Japan to RAYS' exacting quality standards

Note: Single wheel listing. +12 offset is extremely aggressive — verify fender, suspension, and caliper clearance for your specific vehicle before ordering. Fender rolling may be required. Hub-centric rings may be required. Professional fitment specialist verification strongly recommended before installation. Re-torque after first 50–100km.