Mishimoto Performance Intercooler & Pipe Kit – 2024+ Ford Mustang 2.3L EcoBoost | Black Core / Black Pipes | Tune-Free Power Gains

The Mishimoto Performance Intercooler and Pipe Kit for the 2024+ Ford Mustang 2.3L EcoBoost is a complete, direct-fit intercooler system — bar-and-plate intercooler core, hot-side and cold-side aluminium charge pipes, cast turbo outlet elbow, silicone couplers, and all required hardware — engineered to maximize airflow, reduce intake air temperatures, and deliver measurable power gains on the S650 Mustang EcoBoost without requiring a tune. Finished in black core and black pipes for a clean, purposeful underhood appearance. Up to 12 hp and 11 ft-lbs of torque are achievable with no tuning required. Backed by Mishimoto's Lifetime Warranty.

Key Features:

• 60% increase in core volume — bar-and-plate intercooler core with 60% more core volume than the factory unit — dramatically improved charge air cooling capacity for reduced IATs under boost
• Tune-free power gains — up to 12 hp and 11 ft-lbs of torque gains achievable with no ECU tune required — a complete bolt-on performance upgrade for the 2.3L EcoBoost
• Cast aluminium end tanks — cast aluminium end tanks for superior strength and precise internal flow geometry compared to welded sheet alternatives
• Oversized 63mm inlets/outlets — 63mm inlet and outlet ports for improved charge air flow compared to the factory intercooler's smaller ports
• Diverter plate — internal diverter plate ensures even air distribution across the full core width — maximizing the core's cooling efficiency
• Foam sealing strips & air deflector — custom-formed air deflector and foam sealing strips maximize airflow through the core and reduce NVH
• EPDM rubber sandwich mounts — four EPDM rubber sandwich mounts isolate vibration and add rigidity to the intercooler installation
• Pre-drilled NPT port — pre-drilled NPT port on the intercooler for auxiliary sensor installation or data logging (IAT sensor, boost pressure sensor, etc.)
• Complete pipe kit included — hot-side and cold-side aluminium charge pipes with cast connections, cast turbo outlet elbow with integrated BOV seat, CNC-machined quick-disconnect fittings, DuraCore silicone couplers, and high-torque worm-gear clamps
• Factory harness clipping points retained — cast turbo outlet elbow retains factory harness clipping points for a clean, OEM-quality installation
• Mishimoto performance radiator compatible — extra clearance allows compatibility with the Mishimoto performance radiator for a complete Mishimoto cooling system upgrade
• Black/Black finish — black intercooler core and black charge pipes for a clean, purposeful underhood appearance
• Mishimoto Lifetime Warranty — backed by Mishimoto's industry-leading Lifetime Warranty

Why Upgrade the S650 Mustang EcoBoost Intercooler?

• Factory Intercooler Limitation: The 2024+ Mustang EcoBoost's factory intercooler is engineered for the stock 2.3L EcoBoost's power output and emissions compliance — adequate at stock boost levels but increasingly marginal as intake air temperatures rise under sustained boost. Heat-soaked charge air reduces charge density, causes the ECU to pull timing and boost to protect the engine, and limits the consistent power delivery that the EcoBoost's turbocharged architecture is capable of.
• 60% More Core Volume: Mishimoto's bar-and-plate core provides 60% more core volume than the factory intercooler — more core volume means more cooling capacity, more thermal mass, and more consistent IATs under sustained boost. The result is denser charge air, more consistent power delivery, and the ability to maintain the timing and boost that the ECU would otherwise pull under heat-soaked factory intercooler conditions.
• Tune-Free Gains: The Mishimoto intercooler kit delivers up to 12 hp and 11 ft-lbs of torque gains without an ECU tune — the improved charge air temperatures allow the factory ECU to maintain timing and boost that it would otherwise reduce under heat-soaked conditions. For EcoBoost owners who want a meaningful performance upgrade without the cost and complexity of an ECU tune, the Mishimoto intercooler kit is the correct first upgrade.
• Complete System: The Mishimoto kit includes both the intercooler core and the complete charge pipe kit — a complete, direct-fit system that replaces the factory intercooler and pipes without requiring additional components or fabrication.

Colour Options:

• Black Core / Black Pipes (this product — MISMMINT-MUS4-24KBKBK): Black intercooler core and black charge pipes — a clean, blacked-out underhood appearance that complements dark or stealth-themed engine bays.
• Polished: Polished intercooler core and polished pipes — a bright, show-quality underhood appearance. Available separately — verify the correct Mishimoto part number for the polished finish before ordering.

Specifications:

• Brand: Mishimoto
• Part Number: MISMMINT-MUS4-24KBKBK
• Barcode: MMINT-MUS4-24KBKBK
• Core Type: Bar-and-plate
• Core Volume Increase: 60% over factory
• Inlet/Outlet: 63mm
• Finish: Black core / black pipes
• Power Gains: Up to 12 hp / 11 ft-lbs (tune-free)
• Application: 2024+ Ford Mustang — 2.3L EcoBoost (S650)
• Weight: 35.6 lbs (shipping weight)
• Warranty: Mishimoto Lifetime Warranty

Fitment Information:

• 2024+ Ford Mustang — 2.3L EcoBoost — S650 chassis
• Direct-fit — stock location intercooler replacement — no cutting, drilling, or modification required
• Note: Engineered for the 2.3L EcoBoost Mustang only — not compatible with the 5.0L Coyote V8 Mustang. Verify your specific S650 Mustang engine variant before ordering. Professional installation recommended.

What's Included:

• Mishimoto bar-and-plate intercooler core — black finish
• Hot-side aluminium charge pipe — black finish
• Cold-side aluminium charge pipe — black finish
• Cast turbo outlet elbow with integrated BOV seat
• DuraCore silicone couplers
• CNC-machined quick-disconnect fittings
• High-torque worm-gear clamps
• ID-matched transition coupler
• Foam sealing strips and custom air deflector
• EPDM rubber sandwich mounts (x4)
• All required mounting hardware

Installation Notes:

• Direct-fit installation — replaces the factory intercooler and charge pipes in the stock location — no cutting, drilling, or modification required
• All hardware included — no additional components required for a complete installation
• Factory harness clipping points are retained on the cast turbo outlet elbow — route and clip the factory harness as per the factory installation for a clean result
• Verify all charge pipe connections and clamps for boost leaks after installation — a boost leak test before the first boosted drive is recommended
• The pre-drilled NPT port can be used for an IAT sensor, boost pressure sensor, or other auxiliary sensor — plug the port if not used to prevent boost leaks
• Check for boost leaks after the first heat cycle — thermal expansion can affect clamp tension on initial use

Why Mishimoto?

Mishimoto is one of the most respected performance cooling brands in the aftermarket — known for their intercoolers, radiators, oil coolers, and cooling accessories for a wide range of performance vehicles. Mishimoto's engineering-first approach produces cooling components that are tested on the vehicle before release — ensuring correct fitment, correct performance gains, and correct compatibility with the factory systems. Mishimoto's Lifetime Warranty backs every product they produce — a commitment to quality that sets them apart from generic cooling component alternatives. For 2024+ Mustang EcoBoost owners who want a quality, complete intercooler system from a brand with proven engineering credentials and a lifetime warranty, Mishimoto is the correct choice.

Perfect For:

• 2024+ Ford Mustang 2.3L EcoBoost (S650) owners who want a complete, direct-fit intercooler and pipe kit upgrade for tune-free power gains and improved charge air cooling
• EcoBoost Mustang builds where the factory intercooler's heat soak is limiting consistent power delivery under sustained boost
• Owners who want a black/black underhood appearance with Mishimoto's bar-and-plate core and aluminium pipe kit
• S650 EcoBoost builds where the Mishimoto intercooler kit is the foundation of a broader performance upgrade — pairing with a cold air intake, exhaust, and ECU tune for a complete EcoBoost performance package

Note: 2.3L EcoBoost S650 fitment only — not compatible with 5.0L Coyote V8. Complete kit — intercooler core and pipe kit included. Verify all connections for boost leaks after installation. Plug the NPT port if not using an auxiliary sensor. Backed by Mishimoto Lifetime Warranty.