PERRIN Long Length Exhaust Hanger Kit - 4 Piece | Subaru WRX/STI 02-07 / Impreza 93-07 / Forester 98-07 (PSP-EXT-760)

Eliminate exhaust clearance issues and rattles with the PERRIN long length exhaust hanger kit. A complete 4-piece set covering the 2002-2007 Subaru WRX and STI, 1993-2007 Impreza, and 1998-2007 Forester, the PSP-EXT-760 replaces the factory rubber exhaust hangers with longer units that lower the exhaust system for improved clearance — essential when running aftermarket exhaust systems that sit higher than factory, or when the factory hangers have deteriorated and need replacement.

Note: 4-piece kit. Long length — lowers exhaust position relative to factory hangers. Verify this is the correct length for your application before ordering.

Key Features:

• Long length exhaust hangers — lowers exhaust for improved clearance
• 4-piece complete kit
• Fits 2002-2007 Subaru WRX and STI (GD chassis)
• Fits 1993-2007 Subaru Impreza (GC and GD chassis)
• Fits 1998-2007 Subaru Forester (SF and SG chassis)
• PERRIN Performance quality
• 1.1 lbs (set of 4)

Performance Benefits:

• Improved Exhaust Clearance: Long length hangers lower the exhaust system, providing additional clearance between the exhaust and underbody components — critical with aftermarket exhaust systems that may sit higher than factory
• Eliminates Rattles: New hangers eliminate the exhaust contact and rattling caused by worn, cracked, or collapsed factory rubber hangers
• Complete Kit: 4-piece set covers all exhaust hanger locations for a complete replacement
• Correct Fitment: Engineered to the factory hanger mounting points for direct installation
• PERRIN Quality: Built to PERRIN's standards for durability and correct Subaru fitment

Specifications:

• Brand: PERRIN Performance
• Part Number: PSP-EXT-760
• Length: Long (extended length)
• Quantity: 4 pieces (complete set)
• Weight: 1.1 lbs (set)
• Barcode: PSP-EXT-760

Fitment Information:

• 2002-2007 Subaru WRX (GD chassis)
• 2002-2007 Subaru WRX STI (GD chassis)
• 1993-2001 Subaru Impreza (GC chassis)
• 2002-2007 Subaru Impreza (GD chassis)
• 1998-2002 Subaru Forester (SF chassis)
• 2003-2007 Subaru Forester (SG chassis)
• Note: Long length — verify this is the correct hanger length for your specific exhaust system and application before ordering. PERRIN may offer standard length hangers separately.
• Note: Verify hanger quantity required for your specific vehicle — some applications may use fewer than 4 hangers
• Installation: DIY-friendly with basic hand tools

What's Included:

• 4x PERRIN long length exhaust hangers (PSP-EXT-760)

Installation Notes:

• DIY-friendly — basic hand tools and exhaust hanger removal tool recommended
• Lift vehicle safely and support on jack stands before beginning
• Allow exhaust to cool completely before handling
• Use an exhaust hanger removal tool or pry bar to remove factory hangers from mounting pegs — do not cut factory hangers unless replacing all
• Lubricate new hangers with dish soap or rubber lubricant for easier installation onto mounting pegs
• Verify exhaust is correctly positioned and has adequate clearance from underbody components after installation
• Check exhaust position and clearance after first heat cycle

Why Long Length Hangers?

Exhaust hangers are the rubber isolators that suspend the exhaust system from the vehicle's underbody. The factory hangers are sized to position the exhaust at the correct height for the factory exhaust system's diameter and routing. When an aftermarket exhaust system is installed — particularly a larger diameter system or one with a different routing than factory — the exhaust may sit higher than the factory system, reducing clearance between the exhaust and underbody components such as the heat shields, floor pan, and suspension components. In some cases, the aftermarket exhaust may contact these components, causing rattles, heat transfer issues, or damage.

Long length exhaust hangers solve this problem by positioning the exhaust lower than the factory hangers would, restoring adequate clearance between the exhaust and underbody. The longer hanger drops the exhaust by a fixed amount relative to the factory hanger length, providing the additional clearance needed for aftermarket exhaust systems that sit higher than factory. Long length hangers are also useful when the factory hangers have deteriorated and collapsed, causing the exhaust to sit higher than intended — replacing with long length hangers restores correct exhaust position and eliminates contact-related rattles.

Exhaust Hanger Wear — When to Replace:

Factory exhaust hangers are made from rubber, which degrades over time due to heat cycling, ozone exposure, and the mechanical stress of supporting the exhaust system. Signs of worn exhaust hangers include: exhaust rattling or vibrating against underbody components, visible cracking or tearing of the rubber hanger material, the exhaust sitting noticeably lower or higher than its correct position, and exhaust contact with heat shields or other underbody components. On older Subaru platforms like the GC Impreza and SF Forester, factory exhaust hangers are a common wear item that should be inspected and replaced as part of routine maintenance. Replacing worn hangers with PERRIN's long length units addresses both the wear issue and any clearance concerns from aftermarket exhaust installation.

Subaru WRX/STI, Impreza, and Forester — Platform Context:

The PERRIN PSP-EXT-760 covers three generations of Subaru's GC and GD platform vehicles — the 1993-2007 Impreza (including WRX and STI variants), and the 1998-2007 Forester. These platforms share common exhaust hanger mounting point geometry, making a single hanger kit compatible across the entire range. The GC and GD Impreza/WRX/STI and SF/SG Forester are among the most popular Subaru platforms for aftermarket exhaust upgrades, making exhaust hanger kits a common and frequently needed accessory for owners who have installed or are planning to install aftermarket exhaust systems.

Why PERRIN Performance?

PERRIN Performance is one of the most respected Subaru-specialist aftermarket manufacturers in North America, with decades of experience developing performance and support accessories specifically for Subaru platforms. Their exhaust hanger kits are engineered to the correct dimensions for each specific application, ensuring correct fitment and reliable exhaust support. For Subaru owners who want quality exhaust hangers from a manufacturer with genuine Subaru platform expertise, PERRIN is a trusted choice.

Perfect For:

• 2002-2007 Subaru WRX and STI owners installing aftermarket exhaust systems requiring long length hangers for clearance
• 1993-2007 Impreza owners replacing worn factory exhaust hangers with PERRIN long length units
• 1998-2007 Forester owners experiencing exhaust rattles from worn or collapsed factory hangers
• Subaru owners whose aftermarket exhaust contacts underbody components due to insufficient clearance with factory-length hangers
• Anyone needing a complete 4-piece long length exhaust hanger replacement for their GC/GD Impreza, WRX, STI, or SF/SG Forester

Perfect For: 2002-2007 Subaru WRX/STI, 1993-2007 Impreza, and 1998-2007 Forester owners seeking PERRIN long length exhaust hanger kit for improved exhaust clearance, elimination of exhaust rattles, and complete 4-piece hanger replacement.

Pro Tip: A dedicated exhaust hanger removal tool (available at most auto parts stores for under $10) makes removing stubborn factory rubber hangers from their mounting pegs significantly easier and reduces the risk of damaging the mounting pegs — well worth having before starting this job.

4 Piece | Long Length | Multi-Platform: 2002-2007 WRX/STI, 1993-2007 Impreza, 1998-2007 Forester. Verify long length is correct for your application. 1.1 lbs. Allow exhaust to cool before installation.

Solve exhaust clearance and rattle issues on your Subaru with PERRIN PSP-EXT-760 — long length exhaust hanger kit, 4 pieces, fits WRX/STI, Impreza, and Forester across multiple generations.