Enkei NVR5 Wheel – 18x9.5" | 5x120 | ET45 | 72.5mm Bore | Gunmetal | 562-895-1245GM

Enkei NVR5 cast alloy wheel in gunmetal finish. 18-inch diameter, 9.5-inch width, 5x120 bolt pattern, ET45 offset, 72.5mm centre bore. Multi-spoke sport-concave design in Enkei’s cast alloy construction. Primarily spec’d for BMW 5x120 applications — ET45 offset places the wheel at near-OEM position on most E9x/F3x BMW platforms. Gunmetal finish. Single wheel. Ships fast across Canada and the US.

Fitment Specs — Verify All Four Before Ordering

Wheel fitment requires matching four independent specifications to your vehicle. All four must match:

• Bolt pattern: 5x120 — 5 bolts on a 120mm pitch circle diameter. Fits BMW (E30 onwards through most current 3/4/5 Series), Honda/Acura (Accord 6th/7th gen, TL, RDX), Chevrolet Camaro Gen 5/6, and select other vehicles. Confirm your vehicle’s bolt pattern before ordering.
• Offset: ET45 — +45mm offset. Moderate-to-high positive offset. On most BMW E9x/F3x platforms this places the wheel face near stock position. If you are building an aggressive or flush fitment, lower offsets are typically used. If you are running spacers, calculate your effective offset before ordering.
• Centre bore: 72.5mm — hub-centric for BMW (BMW hub bore is nominally 72.6mm). Non-BMW 5x120 vehicles have smaller hub bores (Honda/Acura: 64.1mm, GM Camaro: 67.1mm) and require a hub-centric ring to fill the gap between the wheel bore and the vehicle hub. Running without a hub-centric ring on a vehicle with a smaller hub bore can cause vibration and wheel wobble. Hub-centric rings are available separately.
• Width: 9.5" — wider than OEM on most BMW fitments. At ET45, a 9.5" wide wheel on a BMW 3 Series will typically require a fender lip roll on the rear to clear the inner arch at full droop, depending on ride height and suspension setup. Confirm clearance against your specific vehicle, tyre width, and ride height before ordering.

NVR5 — Enkei Cast Alloy

The NVR5 is a multi-spoke sport-concave design in Enkei’s cast alloy construction. Cast alloy wheels are manufactured by pouring molten aluminium alloy into a mould, producing a strong and consistent wheel structure. Enkei is one of the most respected wheel manufacturers in the aftermarket and OEM space, supplying wheels to multiple vehicle manufacturers. The gunmetal finish is a dark metallic grey consistent with the NVR5’s sport-luxury aesthetic.

Tyre Fitment

On an 18x9.5" wheel with ET45 offset, typical tyre widths are 245–265mm depending on application. Confirm tyre width with your wheel installer based on your specific vehicle, ride height, and clearance requirements.

Single wheel — price is per wheel. Tyre, hardware, and TPMS sensors not included. Hub-centric rings required for non-BMW 5x120 vehicles. Verify bolt pattern, offset, bore, and width clearance before ordering. Professional installation recommended.

Specifications

• Brand: Enkei
• Part Number: 562-895-1245GM
• Model: NVR5
• Construction: Cast alloy
• Finish: Gunmetal
• Diameter: 18"
• Width: 9.5"
• Bolt Pattern: 5x120
• Offset: ET45
• Centre Bore: 72.5mm
• Sold as: Single wheel