GFB G-Force III Electronic Boost Controller with 4-Port Solenoid (3008)

Take precise control of your turbo's boost with the GFB G-Force III electronic boost controller. Featuring a 4-port solenoid for superior boost control accuracy, multiple boost maps, and GFB's proven electronic boost control technology, the G-Force III is the definitive boost management solution for serious turbo builds.

Key Features:

• Electronic boost controller with 4-port solenoid
• Multiple boost map storage
• Precise electronic boost control
• 4-port solenoid for superior accuracy
• Universal turbo application
• User-adjustable boost settings
• Boost spike and creep control
• GFB quality and engineering

Performance Benefits:

• Precise Boost Control: Electronic control delivers accurate, repeatable boost levels
• Multiple Maps: Store and switch between different boost settings
• Spike Control: Eliminates boost spikes for consistent, safe boost delivery
• Creep Control: Prevents boost creep at high RPM
• 4-Port Accuracy: 4-port solenoid provides superior control over 2-port designs
• Tuneable: Fine-tune boost response for your specific turbo and setup

Specifications:

• Brand: Go Fast Bits (GFB)
• Part Number: 3008
• Product: G-Force III Electronic Boost Controller
• Solenoid: 4-port
• Application: Universal (turbo vehicles)
• Weight: 1.3 lbs
• Barcode: 9328022003191

Fitment Information:

• Application: Universal - compatible with all turbocharged vehicles
• Note: Requires boost source and wastegate connection for installation
• Installation: Professional installation and tuning recommended

What's Included:

• GFB G-Force III electronic boost controller unit
• 4-port solenoid
• Wiring harness
• Vacuum/boost lines and fittings
• Mounting hardware
• Installation and setup instructions

Installation Notes:

• Professional installation and setup recommended
• Mount controller in accessible location in cabin or engine bay
• Connect 4-port solenoid to boost source and wastegate actuator
• Connect wiring harness per instructions
• Configure boost maps via controller interface
• Start conservatively and increase boost gradually
• Monitor boost levels closely during initial setup

G-Force III - Third Generation Excellence:

The G-Force III represents GFB's third generation of electronic boost controller technology, incorporating lessons learned from years of real-world use across thousands of turbo builds worldwide. The G-Force III refines the proven G-Force formula with improved solenoid control algorithms, more intuitive user interface, and enhanced boost map management. The result is GFB's most capable and user-friendly electronic boost controller to date.

4-Port Solenoid - Superior Boost Control:

The G-Force III uses a 4-port solenoid, which provides significantly superior boost control accuracy compared to 2-port solenoid designs. A 2-port solenoid simply bleeds boost pressure to control wastegate opening. A 4-port solenoid actively controls both the reference pressure and the vent, providing much more precise and responsive control over wastegate position. This translates to more accurate boost levels, better spike control, and more consistent boost delivery across the RPM range. The 4-port design is the preferred choice for serious performance applications where boost accuracy is critical.

Multiple Boost Maps:

The G-Force III allows you to store multiple boost maps, enabling quick switching between different boost levels for different conditions. Common uses include a lower boost map for pump fuel or wet conditions, a higher boost map for race fuel or optimal conditions, and a valet/street map for daily driving. The ability to switch maps on the fly without reprogramming makes the G-Force III extremely versatile for vehicles used in multiple environments.

Boost Spike and Creep Control:

Two of the most common boost control challenges are boost spike (where boost momentarily exceeds the target level before settling) and boost creep (where boost gradually increases beyond the target at high RPM). The G-Force III's sophisticated control algorithms actively manage both conditions. Spike control prevents the initial overshoot that can stress engine components, while creep control maintains consistent boost levels even as exhaust backpressure increases at high RPM. These features are particularly important for high-power builds where boost accuracy is critical for engine safety.

Electronic vs. Manual Boost Controllers:

Manual boost controllers (MBCs) are simple, inexpensive devices that bleed boost pressure to raise boost levels. While effective for basic boost increases, MBCs cannot actively control boost - they simply set a fixed bleed rate. Electronic boost controllers like the G-Force III actively monitor and adjust boost in real time, providing far more precise control, the ability to store multiple maps, and features like spike and creep control that are impossible with manual controllers. For serious performance builds, an electronic boost controller is the only way to achieve consistent, accurate boost management.

Universal Application:

The G-Force III is compatible with all turbocharged vehicles, making it suitable for a wide range of builds from street cars to dedicated race vehicles. The universal design requires connection to a boost source and the wastegate actuator, which is standard on all turbocharged applications. The flexible installation options allow the controller to be mounted in the cabin for easy access or in the engine bay for a cleaner installation.

Why Go Fast Bits (GFB)?

Go Fast Bits is an Australian manufacturer of high-performance boost control and blow-off valve products, known for their engineering expertise and commitment to genuine performance improvement. The G-Force series has been trusted by turbo enthusiasts and professional tuners worldwide for its reliability, accuracy, and ease of use. GFB's continuous product development ensures the G-Force III incorporates the latest advances in electronic boost control technology.

Perfect For:

• Any turbocharged vehicle requiring precise electronic boost control
• High-power builds needing accurate boost management
• Vehicles requiring multiple boost maps for different conditions
• Builds experiencing boost spike or creep issues
• Enthusiasts upgrading from manual boost controller to electronic control

Perfect For: Turbocharged vehicles seeking GFB G-Force III electronic boost controller for precise boost management, multiple maps, and superior 4-port solenoid accuracy.

Pro Tip: Start with a conservative boost target and work up gradually - the G-Force III's multiple map capability makes it easy to have a safe daily map and a higher performance map for when conditions are right.

4-Port Solenoid: Superior accuracy over 2-port designs. Multiple boost maps. Spike and creep control. Universal turbo application. Professional installation recommended.

Master your boost with GFB G-Force III electronic boost controller - 4-port solenoid, multiple maps, spike and creep control, proven GFB technology.