This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

Free Shipping on most items over $150 (excluding freight/oversized items)

Motul 8100 Eco-Lite Gen3 0W-20 Full Synthetic Engine Oil | 5L | Fuel Economy | Ultra-Low Viscosity | 111364

$264.95 $294.38
SKU: MOT111364
more than 10 available
Free shipping on most orders over $150

Motul 8100 Eco-Lite Gen3 0W-20 Full Synthetic Engine Oil – 5L | 111364

Motul’s 8100 Eco-Lite Gen3 in 0W-20 viscosity — the ultra-low viscosity variant of Motul’s fuel economy-focused full synthetic engine oil line. Formulated for modern engines that specify 0W-20 — primarily Japanese OEM applications (Toyota, Honda, Subaru, Mazda, Nissan) and select American OEM applications (Ford EcoBoost, GM) where 0W-20 is the factory-mandated viscosity for fuel economy compliance. The Gen3 designation reflects Motul’s latest generation formula in the 8100 Eco-Lite line. Sold in 5L format.

0W-20 vs. 5W-30 Eco-Lite — Key Differences

The 0W-20 and 5W-30 are both part of the 8100 Eco-Lite Gen3 line but target different engine populations with different OEM viscosity requirements. The 0W-20 is an even lower HTHS (High Temperature High Shear) viscosity than the 5W-30 — providing a greater fuel economy benefit but requiring an engine specifically engineered and approved for ultra-low viscosity oil. The 0W-20 specification is primarily mandated by Japanese OEMs and select American OEMs for modern fuel economy-optimized engines. The 5W-30 Eco-Lite targets primarily European OEM applications (PSA, Renault) with ACEA C2/C3 requirements. Confirm your engine’s OEM viscosity specification before ordering — do not substitute 0W-20 for 5W-30 or vice versa without OEM approval.

Key Features

  • Ultra-Low Viscosity Fuel Economy Formula: 0W-20 is one of the lowest viscosity grades in mainstream use — engineered to minimize internal engine friction at operating temperature in engines specifically designed for ultra-low viscosity oil. Delivers measurable fuel economy improvement in approved applications
  • Excellent Cold-Start Performance: The 0W winter rating provides exceptional cold-start oil flow — reaching critical engine surfaces faster than higher winter-rated oils (5W, 10W) in cold ambient conditions. Particularly beneficial in cold climates where cold-start wear is the primary engine wear event
  • Full Synthetic Base: 100% synthetic base oil provides superior thermal stability, oxidation resistance, and shear stability compared to mineral or semi-synthetic oils — maintaining viscosity and film strength across the full operating temperature range and extended drain intervals
  • Modern Engine Compatibility: Formulated for modern engines with tight manufacturing tolerances, variable valve timing systems (VVT-i, i-VTEC, AVCS, etc.), turbochargers, and direct injection systems that require ultra-low viscosity oil chemistry for correct operation
  • Motul Engineering: Motul is a French lubricant manufacturer with over 160 years of experience and a strong motorsport heritage — the 8100 range is Motul’s mainstream performance street oil line, engineered to OEM approval standards

Common Applications

0W-20 is the factory-specified viscosity for a wide range of modern Japanese and American OEM engines, including:

  • Toyota / Lexus: 2GR-FKS, 8AR-FTS, A25A-FKS, M20A-FKS, and many other modern Toyota/Lexus engines specifying 0W-20
  • Honda / Acura: K20C, L15B7, and other modern Honda engines specifying 0W-20
  • Subaru: FA20, FB20, FA24 and other modern Subaru engines specifying 0W-20
  • Mazda: PE-VPS, SkyActiv-G, and other modern Mazda engines specifying 0W-20
  • Ford: Select EcoBoost applications specifying 0W-20
  • GM: Select applications specifying 0W-20

Always confirm your specific engine’s OEM oil specification and approved viscosity grade before ordering. Check Motul’s current approval list for your engine’s specific OEM approval code. Do not use 0W-20 in an engine that specifies a higher viscosity grade without OEM approval.

Specifications

  • Brand: Motul
  • Part Number: 111364
  • Series: 8100 Eco-Lite Gen3
  • Viscosity: 0W-20
  • Type: Full Synthetic
  • Volume: 5L

Important: Confirm your engine’s OEM oil specification before ordering. 0W-20 is only suitable for engines specifically approved for ultra-low viscosity oil. Using 0W-20 in an engine that requires a higher viscosity grade may result in insufficient oil film protection under high-load conditions. Check Motul’s current approval list for your specific engine’s OEM approval code.

Free Shipping

Free shipping on orders over $150 with select exclusions.

No Customs Fees

Never get hit with surprise duty or brokerage fees again.

Dedicated Support

Friendly staff on hand who are fellow enthusiasts.