NGK Laser Platinum Spark Plugs, Box of 4 | PLFER7A8EG
NGK Laser Platinum Spark Plugs — Box of 4 | PLFER7A8EG
This listing supplies four NGK PLFER7A8EG Laser Platinum spark plugs, also identified by NGK stock number 94833. Platinum firing surfaces and a copper core support consistent ignition performance and wear resistance in the correct OE-specified application. Ships fast across Canada and the US.
Specifications
- Manufacturer: NGK.
- Plug part number: PLFER7A8EG.
- NGK stock number: 94833.
- Series: Laser Platinum.
- Quantity supplied: four spark plugs.
- Thread: M14 × 1.25.
- Thread reach: 26.5mm.
- Seat: gasket / flat seat.
- Hex size: 16mm / 5/8 inch.
- Terminal: cup type.
- NGK heat range: 7.
- Resistor: 1 kΩ.
- Nominal listed gap: 0.8mm.
- Projected fine-wire platinum center electrode.
- Platinum ground-electrode firing surface.
Construction and Benefits
Laser Platinum plugs use precious-metal firing surfaces to reduce electrode wear compared with conventional nickel designs. The copper core assists heat removal, the ceramic insulator supports electrical insulation and heat transfer, and corrugated insulator ribs help resist flashover. Trivalent metal plating provides corrosion and anti-seizing resistance, while the sealing design helps prevent combustion-gas leakage.
These are application-specific service plugs, not a universal horsepower upgrade. Correct fitment and the condition of the complete ignition and fuel systems determine starting, idle quality, fuel consumption and emissions; no fixed improvement or service-life interval is promised.
Fitment and Installation
Use NGK’s application information and the vehicle manufacturer’s service data to confirm the correct plug. Verify the required gap and installation procedure for the exact engine rather than treating the catalog gap as a tuning recommendation. Handle the fine-wire electrodes carefully and use the specified installation torque and thread-preparation instructions.
Ships fast across Canada and the US.