This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

Free Shipping on most items over $150 (excluding freight/oversized items)

Tein Supra A70 Flex Z Coilovers | VST38-C1SA3-C

$899.38 $946.71
SKU: TEINVST38-C1SA3-C
4 available


Free shipping on most orders over $150

Tein Supra A70 Flex Z Coilovers | VST38-C1SA3-C

Set up your compatible Toyota Supra A70 with Tein Flex Z coilovers, combining full-length ride-height adjustment with 16-level damping adjustment. Tune the stance and damping to suit your setup without relying on a fixed, one-size-fits-all suspension setting. Ships fast across Canada and the US.

Specifications

  • Brand: Tein.
  • Series: Flex Z.
  • Manufacturer part number: VST38-C1SA3-C
  • Damper construction: twin-tube.
  • Damping adjustment: 16 levels.
  • Full-length ride-height adjustment.
  • Front spring rate: 14.0 kgf/mm.
  • Rear spring rate: 6.0 kgf/mm.
  • Reinforced rubber upper mounts, front and rear.
  • Kit configuration: four dampers and four springs.

Supra Fitment

Listed for compatible A70-generation Supra applications. The published VST38-C1SA3-C application table identifies MA70L models for 1987–1992, alongside market-specific MA70, GA70 and JZA70 applications. The original 1986–1992 listing range is not a guarantee for every chassis or market: confirm the chassis code and suspension configuration before ordering. This is not an A80/JZA80 or A90 kit.

MA70L Ride-Height Reference

The published VST38-C1SA3 application data for the MA70L provides the following reference figures. Confirm that these settings apply to the supplied VST38-C1SA3-C kit before installation; separate suffix-specific settings have not been independently verified.

  • Base lowering relative to factory height: front 45mm (approximately 1.8 inches), rear 40mm (approximately 1.6 inches).
  • Recommended front range relative to factory height: −55 to −35mm.
  • Recommended rear range relative to factory height: −50 to −30mm.

These are application reference values, not guaranteed results on every vehicle. Negative values indicate lowering from factory height. Maximum mechanical adjustment limits are not recommended driving settings; final setup must retain suitable travel and clearance.

Adjustment and Installation

Full-length adjustment allows ride height to be set separately from the spring-seat adjustment. Use the application-specific recommended settings rather than treating the maximum mechanical adjustment range as a recommended driving height. Damping adjustment does not change the spring rate, and lowering can affect clearance, alignment and suspension travel.

Installation and setup: Have a qualified installer confirm fitment, follow Tein's instructions, and check tire, wheel and suspension clearance throughout steering and suspension travel. Arrange an alignment after installation and ride-height changes. Do not assume compatibility with the factory electronic damping controls; optional Tein EDFC equipment requires separate application-specific verification.

 

Ships fast across Canada and the US.

Free Shipping

Free shipping on orders over $150 with select exclusions.

No Customs Fees

Never get hit with surprise duty or brokerage fees again.

Dedicated Support

Friendly staff on hand who are fellow enthusiasts.